Research Articles

Dislocations and Flux Pinning inYBa2Cu3O7-δ

+ See all authors and affiliations

Science  12 Jul 1991:
Vol. 253, Issue 5018, pp. 427-429
DOI: 10.1126/science.253.5018.427

Abstract

Bulk YBa2Cu3O7-δ superconductors, under certain processing conditions such as melt texturing, exhibit a very high dislocation density of 109 to 1010 per square centimeter. In addition, the density of low-angle grain boundaries in such samples can be significantly increased (to less than 700-nanometer spacing) through a dispersion of submicrometer-sized Y2BaCuO5 inclusions. These defect densities are comparable to those in high critical current thin films as revealed through scanning tunneling microscopy, and yet the critical current densities in the bulk materials (at 77 kelvin and a field of 1 tesla for example) remain at a 104 amperes per square centimeter level, about two orders of magnitude lower than in thin films. The results imply that these defect density levels are not significant enough to explain the difference in flux pinning strength between the thin film and bulk materials. The observation of spiral-like growth of the superconductor phase in bulk Y-Ba-Cu-O is also reported.

Related Content