Report

Bio-Inspired Polymer Composite Actuator and Generator Driven by Water Gradients

Science  11 Jan 2013:
Vol. 339, Issue 6116, pp. 186-189
DOI: 10.1126/science.1230262

You are currently viewing the abstract.

View Full Text

Mini Mighty Muscle

Actuators—or artificial muscles—take electrical or chemical energy and convert it into mechanical force. Typically, actuators made from polymers can show large deformations, but cannot generate a lot of force. Ma et al. (p. 186; see the Perspective by Kim and Kwon) describe a polymer composite based on a modified polypyrrole that expands in response to water absorption. The composite was able to generate large stresses and forces, and offered a high work density approaching those of the best conducting polymer electrochemical actuators. Magnetic nanoparticles incorporated into polymer films were used to control the locomotion of the actuator.

Abstract

Here we describe the development of a water-responsive polymer film. Combining both a rigid matrix (polypyrrole) and a dynamic network (polyol-borate), strong and flexible polymer films were developed that can exchange water with the environment to induce film expansion and contraction, resulting in rapid and continuous locomotion. The film actuator can generate contractile stress up to 27 megapascals, lift objects 380 times heavier than itself, and transport cargo 10 times heavier than itself. We have assembled a generator by associating this actuator with a piezoelectric element. Driven by water gradients, this generator outputs alternating electricity at ~0.3 hertz, with a peak voltage of ~1.0 volt. The electrical energy is stored in capacitors that could power micro- and nanoelectronic devices.

View Full Text