Stability in Real Food Webs: Weak Links in Long Loops

See allHide authors and affiliations

Science  10 May 2002:
Vol. 296, Issue 5570, pp. 1120-1123
DOI: 10.1126/science.1068326

This article has a correction. Please see:


Increasing evidence that the strengths of interactions among populations in biological communities form patterns that are crucial for system stability requires clarification of the precise form of these patterns, how they come about, and why they influence stability. We show that in real food webs, interaction strengths are organized in trophic loops in such a way that long loops contain relatively many weak links. We show and explain mathematically that this patterning enhances stability, because it reduces maximum “loop weight” and thus reduces the amount of intraspecific interaction needed for matrix stability. The patterns are brought about by biomass pyramids, a feature common to most ecosystems. Incorporation of biomass pyramids in 104 food-web descriptions reveals that the low weight of the long loops stabilizes complex food webs. Loop-weight analysis could be a useful tool for exploring the structure and organization of complex communities.

An increasing number of studies provide evidence for the occurrence in real biological communities of patterns of interaction strengths that are important to community stability (1–8). Such patterns are characterized, for example, by strong links embedded in a majority of weak links (1, 2, 6) or by strong links concentrated on the lower trophic levels (5). However, there remains a need to determine which food-web properties cause the patterns, and to understand the exact form of the patterns and how they influence stability. Here we analyze the stabilizing properties of observed patterns in food webs (5, 9) by looking at the distribution of interaction strengths (10, 11) over trophic loops (12–14) of different lengths.

We carried out our first analysis with seven documented soil food webs (15, 16). The data collected for these communities enabled us to estimate population sizes, feeding rates, and interaction strengths among species (5, 9, 17). Throughout the analysis, species refers to trophic species or functional groups in which species are aggregated that share the same prey and predators and have similar physiological characteristics (18). With respect to interaction strengths, we follow May (10); interaction strengths are the values of the elements of the (Jacobian) community matrix and represent the size of the effects of species on each other's dynamics near equilibrium (10, 11). We present results obtained from the food web of the central plains experimental range (CPER) as a representative example of the seven food webs.

As indicated in the diagram of the CPER food web (Fig. 1A), a loop describes a pathway of interactions from a certain species through the web back to the same species without visiting other species more than once; hence, a loop is a closed chain of trophic links (14). Each step on the path going from one species to another refers to the interaction between the two species (Fig. 1, B and C), which can be either a positive bottom-up effect or a negative top-down effect. The length of a loop is the number of different species visited. Loops of length 2 thus go from a predator to a prey and back (Fig. 1B). Longer loops are formed wherever food chains separate and are connected again (through either polyphagy or omnivory) (Fig. 1C). A three-species omnivorous relation forms two loops of length 3, one with two top-down effects and one bottom-up effect, and the other with two bottom-up effects and one top-down effect (Fig. 1C).

Figure 1

Feeding relations (A) and loops (B) in the CPER food web. Interaction strengths (values in parentheses), shown for the feeding relations in bold arrows, are the values as published for the CPER food web (9). (B) A single predator-prey relation forms a loop of length 2, containing a bottom-up effect (prey on predator) and a top-down effect (predator on prey) (I, II). The weight of this particular loop in the CPER food web was 0.55 per year (geometric mean of the absolute values of the interaction strengths). (C) Apart from three loops of length 2, a three-species omnivorous relation forms two loops of length 3: a loop containing two top-down effects and one bottom-up effect (I, II, III), and one containing two bottom-up effects and one top-down effect (I′, II′, III′). The weights of these loops were 0.14 and 0.10 per year, respectively.

Originally, a loop is quantified as a product of interaction strengths (14). Here, we introduce the term “loop weight,” which is defined as the geometric mean of the absolute values of the interaction strengths in the loop. Quantifying trophic loops in this way allows us to compare loops of different lengths and to use the maximum of all loop weights as an indicator for matrix stability. This indicative value can be understood as follows. Consider community matrix A = (αij), where all elements have been specified except the diagonal elements αii, αii < 0. These diagonal elements refer to the intraspecific interactions. By making the absolute value of αii large enough, community matrix A can be stabilized (all its eigenvalues will have negative real parts). We found that the maximum of all the loop weights in community matrix A is an approximation of the absolute value of αii sufficient for matrix stability (19).

In the CPER food web, we characterized the observed interaction strengths (9) in terms of the weights of the various loops of different lengths, maximum loop weight, and matrix stability. We compared the community matrix, including the patterned interaction strengths (“real matrices”), with a number of randomizations of this matrix (“randomized matrices”). We acquired the randomized matrices by randomly exchanging predator-prey pairs of interaction strengths, keeping these pairs as such intact and preserving the sign structure of the matrix (5, 7, 20). We measured stability as the minimum degree of relative intraspecific interaction needed for matrix stability (s); we called matrices with a smallers “more stable” (11).

We found that loop weights of the longer loops were low in the real matrix, whereas in randomized matrices the longer loops tended to be heavier than the shorter loops (Fig. 2, A and B). This can be explained as follows. It is a well-known regularity that the absolute values of the effects of predators on their prey are, on average, two orders of magnitude larger than the values of the effects of prey on their predators (7, 21). This was also found in the CPER web (9) and hence in the randomizations of the CPER web. Therefore, loops are expected to be heavy when they contain many top-down effects relative to bottom-up effects. This explains the heavy long loops in the randomized matrices. But in the real matrices, the long loops with many top-down effects had a relatively low weight. This showed that not all top-down or bottom-up effects were equal, and it indicated that in the real matrices these long loops contained many relatively small top-down effects. The consequence was that maximum loop weight in the real matrix was much lower than in the randomized matrices; along with this, as expected (19), the real matrix was much more stable (Fig. 2C). Moreover, we found a close correspondence between maximum loop weight and stability within the set of randomized matrices (Fig. 2C). We obtained similar results for the other soil food webs. A sensitivity analysis, evaluating the effects of variation in the input parameter values, showed the general robustness of the stability analysis (22).

Figure 2

Loop length, loop weight, and stability in the CPER food web and randomizations (20) of this matrix. (A) Loop weight versus loop length in the real matrix. (B) Loop weight versus loop length in a randomized matrix (a typical example). Long loops with a relatively small weight—those with many bottom-up effects—are not shown because they are not relevant for maximum loop weight. (C) Maximum loop weight and stability of the real matrix (solid diamond) and of 10 randomized matrices (open diamonds). We measured stability as the value s that leads to a minimum level of intraspecific interaction strength needed for matrix stability (11). In a sensitivity analysis, we found that variation in the parameter values within intervals between half and twice the observed value led to only a small variation in stability (22).

A strong biomass decrease over trophic levels, together with the fact that predators may feed on several prey types, caused weak links to aggregate in long loops. The principle is illustrated in Fig. 3 for a three-species omnivorous relation. The omnivore feeds on two prey types, which are at different trophic levels. We assume that it feeds according to prey abundance, and that the biomass of the prey on the lower trophic level is much larger than that of the prey on the higher trophic level (the biomass pyramid). Then the omnivore feeds largely on the lowest trophic level (23). As a result, it exerts a relatively large top-down effect on its lowest prey and a relatively small top-down effect on its highest prey, because the top-down effect is the feeding rate per unit of predator biomass (11). The long loop with two top-down effects contains this relatively small effect of the omnivore, together with the large top-down effect of the intermediate predator on the bottom prey; that is, the two relatively large top-down effects are in different loops (Fig. 3B). Hence, the result of biomass pyramids is that long loops with relatively many top-down effects always contain at least one relatively small top-down effect: the effect of the omnivorous predator on its high trophic-level prey. Randomization (20) means that large top-down effects from different trophic loops may end up in the same loop, causing very high loop weights, leading to instability.

Figure 3

Interaction strengths and loop weights in an omnivorous food web. (A) Equilibrium feeding rates and population sizes. Feeding rates were assumed to be proportional to the population sizes of the prey. (B) Interaction strengths (11). In the example, we assumed efficiencies of 0.1 for all species. The loop weights of the two loops of length 3 are (|−0.5| × |−5| × 0.05)1/3 = 0.5 (anticlockwise loop, starting with the omnivores) and (|−5| × 0.05 × 0.05)1/3 = 0.23 (clockwise loop). The relatively small top-down effect (−0.5) keeps the weight of the loop with two top-down effects relatively low (see text).

We tested the effect of biomass pyramids on loop weight and stability with the use of 104 food webs in the collection assembled by Cohenet al. (24). We imposed a pyramidal biomass structure on these webs (22) and calculated interaction strengths for all these communities (11), carrying out the same analysis as was done for the soil food webs (Fig. 4). Notwithstanding the acknowledged shortcomings of this particular data set and the criticisms it has attracted (3,25), the analysis reveals that the 104 pyramidal (derived from pyramidal structure) webs had the same characteristic distribution of loop weights over loop lengths as did the CPER web—that is, long loops had low loop weights (as shown in Fig. 2A)—giving these webs a lower maximum loop weight and a much lower level of intraspecific interaction needed for stability than their randomized (20) counterparts. Looking at the complexity of the 104 webs, we found that the more complex webs contained relatively long loops (Fig. 4A) but had roughly the same maximum loop weight and stability as less complex webs with shorter loops (Fig. 4, B and D). In the set of randomized matrices, webs with longer loops had a larger maximum loop weight and were less stable than webs with shorter loops (Fig. 4, C and E). Varying the shape of the trophic pyramid in the range from no decrease to a factor of 50 decrease of biomass per trophic level showed that roughly a factor of 10 biomass decrease over trophic level was sufficient to generate strong stabilizing patterns of interaction strengths. As more extreme decreases in biomass over trophic levels are very common in natural ecosystems (26), the results identify a regularity in a broad class of ecosystems: In complex food webs with pyramids of biomass, long loops contain weak links, resulting in a low maximum loop weight and a low level of intraspecific interaction needed for stability (27).

Figure 4

Relation among complexity, maximum loop length, maximum loop weight, and stability in a set of 104 food webs (24). Community matrices were derived in the same way as in the analysis of the CPER food web (5, 11). We made the simplifying assumption that species feed according to prey abundance and assumed equal conversion efficiencies eij =e = 0.1 and equal specific natural death ratesdj = d = −1 (per year) for all species. Equilibrium population sizes in each food web were obtained by imposing a simple pyramidal biomass structure with a factor of 20 biomass decrease over trophic levels (22). Each web was represented by 100 pyramidal matrices constructed by drawing matrix elements randomly from uniform intervals 〈0, 2αij〉 around the derived values of interaction strengths αij. For each pyramidal matrix, a randomized counterpart was derived (20). Maximum loop weight and stability refer to theaverage value of 100 matrices. (A) Maximum loop length versus complexity [the product of the number of species (n) and connectance (C)]. (B) Maximum loop weight versus maximum loop length of the pyramidal matrices. (C) Maximum loop weight versus maximum loop length of the randomized matrices. (D) Stability versus maximum loop length of the pyramidal matrices. (E) Stability versus maximum loop length of the randomized matrices.

Stabilizing effects of patterns of interaction strengths have been put forward by empiricists and theoreticians. Establishing interaction strengths in species manipulation and perturbation experiments, Paine (1) and Wootton (2) showed that communities are characterized by a few strong links embedded in a majority of weak links. Yodzis (7) demonstrated the importance of the patterning of strong and weak links for model stability. De Ruiteret al. (5) showed the importance of energetic organization for food-web stability. McCann et al. (6) revealed that particular combinations of weak and strong links are crucial to stability. This analysis contributes to these findings by showing that stabilizing combinations of strong and weak links are organized in trophic loops, linking this organization to trophic pyramids and explaining the effect in terms of general mathematical stability criteria. The potentially destabilizing effect of long loops is well known (1214, 28); our results indicate how weak links prevent complex food webs with long loops from being unstable (22). Although it remains difficult to decide on the level of detail with which feeding relations are distinguished, loop-weight analysis could be a useful tool for assessing the structure and organization of complex networks of ecological relations. Characterizing complex structures is relevant, because it is often on this level of multitrophic communities that questions about the fragility of system structure and functioning are most pressing.

  • * To whom correspondence should be addressed. E-mail: a.neutel{at}


View Abstract

Stay Connected to Science

Navigate This Article