Structure of P-Glycoprotein Reveals a Molecular Basis for Poly-Specific Drug Binding

See allHide authors and affiliations

Science  27 Mar 2009:
Vol. 323, Issue 5922, pp. 1718-1722
DOI: 10.1126/science.1168750


P-glycoprotein (P-gp) detoxifies cells by exporting hundreds of chemically unrelated toxins but has been implicated in multidrug resistance (MDR) in the treatment of cancers. Substrate promiscuity is a hallmark of P-gp activity, thus a structural description of poly-specific drug-binding is important for the rational design of anticancer drugs and MDR inhibitors. The x-ray structure of apo P-gp at 3.8 angstroms reveals an internal cavity of ∼6000 angstroms cubed with a 30 angstrom separation of the two nucleotide-binding domains. Two additional P-gp structures with cyclic peptide inhibitors demonstrate distinct drug-binding sites in the internal cavity capable of stereoselectivity that is based on hydrophobic and aromatic interactions. Apo and drug-bound P-gp structures have portals open to the cytoplasm and the inner leaflet of the lipid bilayer for drug entry. The inward-facing conformation represents an initial stage of the transport cycle that is competent for drug binding.

The American Cancer Society reported over 12 million new cancer cases and 7.6 million cancer deaths worldwide in 2007 (1). Many cancers fail to respond to chemotherapy by acquiring MDR, to which has been attributed the failure of treatment in over 90% of patients with metastatic cancer (2). Although MDR can have several causes, one major form of resistance to chemotherapy has been correlated with the presence of at least three molecular “pumps” that actively transport drugs out of the cell (3). The most prevalent of these MDR transporters is P-gp, a member of the adenosine triphosphate (ATP)–binding cassette (ABC) superfamily (4). P-gp has unusually broad poly-specificity, recognizing hundreds of compounds as small as 330 daltons up to 4000 daltons (5, 6). Most P-gp substrates are hydrophobic and partition into the lipid bilayer (7, 8). Thus, P-gp has been likened to a molecular “hydrophobic vacuum cleaner” (9), pulling substrates from the membrane and expelling them to promote MDR.

Although the structures of bacterial ABC importers and exporters have been established (1015) and P-gp has been characterized at low resolution by electron microscopy (16, 17), obtaining an x-ray structure of P-gp is of particular interest because of its clinical relevance. We describe the structure of mouse P-gp (ABCB1), which has 87% sequence identity to human P-gp (fig. S1), in a drug-binding–competent state (18, 19). We also determined cocrystal structures of P-gp in complex with two stereoisomers of cyclic hexapeptide inhibitors, cyclic-tris-(R)-valineselenazole (QZ59-RRR) and cyclic-tris-(S)-valineselenazole (QZ59-SSS), revealing a molecular basis for poly-specificity.

Mouse P-gp protein exhibited typical basal adenosine triphosphatase (ATPase) activity that was stimulated by drugs like verapamil and colchicine (fig. S2A) (20). P-gp recovered from washed crystals retained near-full ATPase activity (fig. S3). Both QZ59 compounds inhibited the verapamil-stimulated ATPase activity in a concentration-dependent manner (fig. S2B). Both stereoisomers inhibited calcein-AM export with median inhibitory concentration (IC50) values in the low micromolar range (fig. S4) and increasing doses of QZ59 compounds resulted in greater colchicine sensitivity in P-gp–overexpressing cells (fig. S5).

The structure of P-gp (Fig. 1) represents a nucleotide-free inward-facing conformation arranged as two “halves” with pseudo two-fold molecular symmetry spanning ∼136 Å perpendicular to and ∼70 Å in the plane of the bilayer. The nucleotide-binding domains (NBDs) are separated by ∼30 Å. The inward-facing conformation, formed from two bundles of six transmembrane helices (TMs 1 to 3, 6, 10, 11 and TMs 4, 5, 7 to 9, 12), results in a large internal cavity open to both the cytoplasm and the inner leaflet. The model was obtained as described in (18) by using experimental electron density maps (figs. S6 and S7 and table S1), verified by multiple FobsFcalc maps (figs. S8 to S10), with the topology confirmed by (2-hydroxy-5-nitrophenyl)mercury(II) chloride (CMNP)–labeled cysteines (figs. S6, B to D; S7C, and S11, and table S2). Two portals (fig. S12) allow access for entry of hydrophobic molecules directly from the membrane. The portals are formed by TMs 4 and 6 and TMs 10 and 12, each of which have smaller side chains that could allow tight packing during NBD dimerization (table S3). At the widest point within the bilayer, the portals are ∼9 Å wide, and each is formed by an intertwined interface in which TMs 4 and 5 (and 10 and 11) crossover to make extensive contacts with the opposite α-helical bundle (Fig. 1). Each intertwined interface buries ∼6900 Å2 to stabilize the dimer interface and is a conserved motif in bacterial exporters (13, 14). The structure is consistent with previous cross-linking studies that identified residue pairs in the intertwined interface (fig. S13). The volume of the internal cavity within the lipid bilayer is substantial (∼6000 Å3) and could accommodate at least two compounds simultaneously (21). The presumptive drug-binding pocket is made up of mostly hydrophobic and aromatic residues (table S3). Of the 73 solvent accessible residues in the internal cavity, 15 are polar and only two (His60 and Glu871), located in the N-terminal half of the TMD, are charged or potentially charged. In this crystal form, two P-gp molecules (PGP1 and PGP2) are in the asymmetric unit and are structurally similar, with the only appreciable differences localized in the NBDs and the four short intracellular helices (IHs 1 to 4) that directly contact the NBDs (fig. S14).

Fig. 1.

Structure of P-gp. (A) Front and (B) back stereo views of PGP. TMs 1 to 12 are labeled. The N- and C-terminal half of the molecule is colored yellow and blue, respectively. TMs 4 and 5 and TMs 10 and 11 crossover to form intertwined interfaces that stabilize the inward-facing conformation. Horizontal bars represent the approximate positioning of the lipid bilayer. The N- and C-termini are labeled in (A). TM domains and NBDs are also labeled.

P-gp can distinguish between the stereoisomers of cyclic peptides (Fig. 2, A and B), which result in different binding locations, orientation, and stoichiometry. QZ59-RRR (Fig. 2A) binds one site per transporter located at the center of the molecule between TM6 and TM12 (Fig. 2, C and E). The binding of QZ59-RRR to the “middle” site is mediated by mostly hydrophobic residues on TMs 1, 5, 6, 7, 11, and 12 (table S3). QZ59-SSS (Fig. 2B) binds two sites per P-gp molecule (Fig. 2, D and F). The QZ59-SSS molecule occupying the “upper” site is surrounded by hydrophobic aromatic residues on TMs 1, 2, 6, 7, 11, and 12 (table S3) and a portion of this ligand is disordered in both PGP1 and PGP2 (fig. S15). The ligand in the “lower” site that binds to the C-terminal half of the TMD is in close proximity to TMs 1, 5, 6, 7, 8, 9, 11, and 12 and surrounded by three polar residues (Gln721, Gln986, and Ser989).

Fig. 2.

Binding of novel cyclic peptide P-gp inhibitors. Chemical structures of (A) QZ59-RRR and (B) QZ59-SSS. (C) Location of one QZ59-RRR (green spheres) and (D) two QZ59-SSS (blue and cyan spheres) molecules in the P-gp internal cavity. (E and F) Stereo images showing interaction of transmembrane helices with QZ59 compounds viewed from the intracellular side of the protein looking into the internal chamber. In both cases, the compound(s) are sandwiched between previously identified drug-binding TMs 6 and 12. The location of the QZ59 compounds was verified by anomalous Fourier (fig. S15, B and C) and FobsFcalc maps (figs. S15, D and E; S16; and S17).

The cocrystal structures of P-gp with QZ59 compounds demonstrate that the inward-facing conformation is competent to bind drugs. Previous studies have identified residues that interact with verapamil (fig. S1) (22, 23). Many of these residues face the drug-binding pocket (Fig. 3A and figs. S15 and S16, and table S3) and are highly conserved (fig. S1), which suggests a common mechanism of poly-specific drug recognition. For QZ59-RRR and both QZ59-SSS molecules, the isopropyl groups point in the same direction, toward TMs 9 to 12 (Fig. 3A). Although certain residues in P-gp contact both QZ59 compounds, the specific functional roles of the residues binding each inhibitor are different (fig. S17). For example, F332 contacts the molecules in the upper but not lower sites of QZ59-SSS but does contact the inhibitor in the middle (QZ59-RRR) site (fig. S17, C and J). F724 is near both the middle (fig. S17E) and lower (fig. S17M) sites, but is much closer to a selenium atom in QZ59-SSS. V978 plays an important role having close proximity to all three QZ59 sites (fig. S17, H and N). Note that both F724 (human F728) and V978 (human V982) are protected from methanethiosulfonate-verapamil (MTS-verapamil) labeling by verapamil (22, 23) (Fig. 3B and figs. S1 and S18), which indicates that both are important for drug binding. Although the upper half of the drug-binding pocket contains predominantly hydrophobic and aromatic residues, the lower half of the chamber has more polar and charged residues (fig. S19). Hydrophobic substrates that are positively charged may bind using these residues similarly to the poly-specific drug-binding pockets of QacR and EmrE that use residues like glutamate to neutralize different drugs (24, 25).

Fig. 3.

Drug-binding residues of P-gp. (A) Stereo view of the drug-binding cavity. Cα trace shown in gray. The QZ59-SSS in the lower (cyan) and upper (blue), as well as QZ59-RRR occupying the middle site (green) are superimposed. Residues within ∼4 to 5 Å of QZ59 compounds are shown as spheres. Spheres colored orange and red represent residues that only contact QZ59-SSS in the lower and upper site, respectively. Residues in common between QZ59-RRR and QZ59-SSS sites are yellow. Four residues (gray spheres) are close to QZ59-RRR but neither QZ59-SSS molecules. (B) Venn diagram of residues in close proximity to QZ59 molecules and residues that are protected from MTS labeling by verapamil binding (fig. S1) (22, 23). Only residues in contact with the model for QZ59-SSS are displayed. Residues that interact only with verapamil are omitted from (A) for clarity and are shown in fig. S16.

The drug-binding pocket of P-gp is nearly six times as large as that of BmrR (YvcC) and hPXR and differs significantly from AcrB, wherein drug binding is mediated by residues from β sheets on the extracellular side of the inner cell membrane (2628). For P-gp, along with the permeases from the three H+ drug antiporter families (MATE, SMR, and MFS), the drug–binding site resides in the cell membrane and is formed by TM helices. Extraction of drug directly from the cytoplasm–lipid bilayer is a common theme (29). In fact, most P-gp substrates readily partition into the plasma membrane, and lipids are required for drug-stimulated ATPase activity (30). P-gp is a unidirectional lipid flippase (4), transporting phospholipids from the inner to outer leaflets of the bilayer (31). The inward-facing conformation of P-gp (Fig. 1) provides access to an internal chamber through two portals (fig. S12) that are open wide enough to accommodate hydrophobic molecules and phospholipids. The portals form a contiguous space spanning the width of the molecule that allow P-gp to “scan” the inner leaflet to select and bind specific lipids and hydrophobic drugs before transport (Fig. 4). Lipids and substrates may remain together during initial entry into the internal cavity and could explain their requirement in promoting ATPase activity.

Fig. 4.

Model of substrate transport by P-gp. (A) Substrate (magenta) partitions into the bilayer from outside of the cell to the inner leaflet and enters the internal drug-binding pocket through an open portal. The residues in the drug-binding pocket (cyan spheres) interact with QZ59 compounds and verapamil in the inward-facing conformation. (B) ATP (yellow) binds to the NBDs causing a large conformational change presenting the substrate and drug-binding site(s) to the outer leaflet and/or extracellular space. In this model of P-gp, which is based on the outward-facing conformation of MsbA and Sav1866 (13, 14), exit of the substrate to the inner leaflet is sterically occluded, which provides unidirectional transport to the outside.

To accommodate its largest substrates, P-gp may sample even wider conformations in the cell membrane than observed in this crystal form. We were able to soak small hydrophobic heavy-metal compounds [ethyl-mercury(II) chloride, 255 daltons, and tetramethyl-lead, 267 daltons] directly into preformed native P-gp crystals, but not QZ59 compounds (660 daltons) (fig. S20). Cocrystals of P-gp with QZ59-RRR and -SSS were only obtained by preincubating these compounds with detergent-solubilized P-gp before crystallization. Taken together, we propose that P-gp samples widely open conformations both in detergent-solution and within the membrane to bind larger molecules. Consistent with this hypothesis, a very wide open inward-facing crystal structure of the bacterial homolog of P-gp, MsbA, was previously determined and could accommodate its large substrate, Kdo2-lipid A (Mr 2.3 kD) (14). This large degree of flexibility is also supported by data from electron paramagnetic resonance spectroscopy of MsbA in the lipid membrane (32), as well as the inward-facing conformation of other ABC transporters that also have NBDs far apart (33, 34).

The inward-facing structure does not allow substrate access from the outer membrane leaflet nor the extracellular space (Fig. 4A). We propose that this conformation represents the molecule in a pretransport state, because we demonstrate drug binding to an internal cavity open to the inner leaflet and cytoplasm. This conformation likely represents an active state of P-gp because protein recovered from crystals had significant drug-stimulated ATPase activity. During the catalytic cycle, binding of ATP, stimulated by substrate, likely causes a dimerization in the NBDs, which produces large structural changes resulting in an outward-facing conformation similar to the nucleotide-bound structures of MsbA or Sav1866 (Fig. 4B). Depending on the specific compound, substrates could either be released as a consequence of decreased binding affinity caused by changes in specific residue contacts between the protein and drug going from the inward- to outward-facing conformation or, alternatively, facilitated by ATP hydrolysis. In either case, ATP hydrolysis likely disrupts NBD dimerization and resets the system back to inward facing and reinitiates the transport cycle (35) (Fig. 4).

Supporting Online Material

Materials and Methods

Figs. S1 to S20

Tables S1 to S3


References and Notes

Stay Connected to Science

Navigate This Article