Research Article

Soft-Chemistry–Based Routes to Epitaxial α-Quartz Thin Films with Tunable Textures

See allHide authors and affiliations

Science  17 May 2013:
Vol. 340, Issue 6134, pp. 827-831
DOI: 10.1126/science.1232968

You are currently viewing the abstract.

View Full Text

Log in to view the full text

Log in through your institution

Log in through your institution

Fabricating Quartz

Quartz is used industrially as an abrasive, as an inert glassy material, or for high-quality crystals in microelectronics. It is also valued for its piezoelectronic properties. However, it is hard to grow quartz as a patterned material or to integrate it into nanostructured devices. Carretero-Genevrier et al. (p. 827; see the Perspective by Brinker and Clem) have developed a method for preparing oriented epitaxial thin films of polycrystalline α-quartz on single-crystal silicon substrates using ambient pressure and temperatures below 1000°C. Different processing conditions can be used to fabricate quartz films with a variety of pore sizes or as a dense nonporous α-quartz film.


Piezoelectric nanostructured quartz films of high resonance frequencies are needed for microelectronic devices; however, synthesis methods have been frustrated by the inhomogeneous crystal growth, crystal twinning, and loss of nanofeatures upon crystallization. We report the epitaxial growth of nanostructured polycrystalline quartz films on silicon [Si(100)] substrates via the solution deposition and gelation of amorphous silica thin films, followed by thermal treatment. Key to the process is the combined use of either a strontium (Sr2+) or barium (Ba2+) catalyst with an amphiphilic molecular template. The silica nanostructure constructed by cooperative self-assembly permits homogeneous distribution of the cations, which are responsible for the crystallization of quartz. The low mismatch between the silicon and α-quartz cell parameters selects this particular polymorph, inducing epitaxial growth.

View Full Text

Stay Connected to Science