A Direct Quantitative Measure of Surface Mobility in a Glassy Polymer

See allHide authors and affiliations

Science  28 Feb 2014:
Vol. 343, Issue 6174, pp. 994-999
DOI: 10.1126/science.1244845

You are currently viewing the abstract.

View Full Text

Log in to view the full text

Log in through your institution

Log in through your institution

Polymer Film Behavior

An ongoing debate in the understanding of the behavior of thin-film glassy polymers is whether there is nanoconfinement of large molecules or enhanced mobility near a free surface. Chai et al. (p. 994; see the Perspective by Chen et al.) prepared polymer films with a sharp step in the profile by depositing broken film fragments onto a uniform underlay. Atomic force microscopy revealed changes to the overall film profile with time at various temperatures. A transition was observed from localized motions to relaxation of the entire film at a temperature close to that of the bulk glass transition temperature.


Thin polymer films have striking dynamical properties that differ from their bulk counterparts. With the simple geometry of a stepped polymer film on a substrate, we probe mobility above and below the glass transition temperature Tg. Above Tg the entire film flows, whereas below Tg only the near-surface region responds to the excess interfacial energy. An analytical thin-film model for flow limited to the free surface region shows excellent agreement with sub-Tg data. The system transitions from whole-film flow to surface localized flow over a narrow temperature region near the bulk Tg. The experiments and model provide a measure of surface mobility in a simple geometry where confinement and substrate effects are negligible. This fine control of the glassy rheology is of key interest to nanolithography among numerous other applications.

View Full Text

Stay Connected to Science