Research Article

Structure-guided multivalent nanobodies block SARS-CoV-2 infection and suppress mutational escape

See allHide authors and affiliations

Science  12 Jan 2021:
DOI: 10.1126/science.abe6230


The severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) pandemic continues to spread with devastating consequences. For passive immunization efforts, nanobodies have size and cost advantages over conventional antibodies. Here, we generated four neutralizing nanobodies that target the receptor-binding domain of the SARS-CoV-2 spike protein. We defined two distinct binding epitopes using x-ray crystallography and cryo-electron microscopy. Based on the structures, we engineered multivalent nanobodies with more than 100-fold improved neutralizing activity than monovalent nanobodies. Biparatopic nanobody fusions suppressed the emergence of escape mutants. Several nanobody constructs neutralized through receptor-binding competition, while other monovalent and biparatopic nanobodies triggered aberrant activation of the spike fusion machinery. These premature conformational changes in the spike protein forestalled productive fusion, and rendered the virions non-infectious.

The current pandemic of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) poses severe challenges to patients, health care systems, and economic and social activity. While efforts to develop vaccines are advancing rapidly, vaccines will likely not be suitable for immunocompromised patients. Additional therapeutic modalities for prophylaxis or treatment of high-risk patients are needed, as well as testing of vaccines in children. Neutralizing antibodies or related molecules therefore offer great potential as immediate and direct-acting antiviral agents (1). Yet, they cannot be easily and economically produced in sufficient amounts for mass application, and cannot be readily modified to include multiple specificities without major costs in yield and quality. Conventional antibodies will also have to be assessed for any possibility of antibody-dependent enhancement (ADE) of infection (2). In contrast, variable domains of camelid heavy chain-only antibodies (VHHs), also known as nanobodies, offer an opportunity to rapidly produce antiviral agents for passive immunization. Production in prokaryotic expression systems is cheap, easily scaled up, and allows straight-forward protein engineering, including multivalent nanobodies with enhanced functionalities (3). Nanobodies have favorable biochemical properties, including high thermostability and deep tissue penetration. ALX-0171, a trivalent nanobody that neutralizes respiratory syncytial virus (RSV), was developed for application using inhalators and accelerated viral clearance in patients, although treatment several days after symptom onset did not improve the clinical outcome (4).

The SARS-CoV-2 spike protein binds the cellular receptor ACE2 and catalyzes membrane fusion (5). Conformational flexibility of the trimeric spike protein allows each of its receptor binding domains (RBD) to exist in two major configurations: a down conformation that is thought to be less accessible to binding of most neutralizing antibodies (NAbs), and an up conformation that binds ACE2 and the majority of NAbs to the RBD (68). Many NAbs bind to the RBD of the spike protein and compete with ACE2 binding when the RBD is in the up conformation, thereby hindering infection (9, 10). A few NAbs can bind to and stabilize the down conformation and thereby prevent the conformation changes required for viral entry (11, 12). Other mechanisms of neutralization or prevention of infection, such as antibody-dependent cellular toxicity (13), are possible, but none have been characterized in molecular detail.


Camelid nanobodies that bind two different epitopes on the SARS-CoV-2 spike RBD neutralize infection

We immunized one alpaca and one llama with the RBD of SARS-CoV-2 spike as well as formalin-inactivated SARS-CoV-2 to elicit neutralizing heavy chain-only antibodies (fig. S1A). We identified 23 candidate nanobodies (Fig. 1A and fig. S1B) by phage display, and confirmed binding of 10 hits by ELISA (Fig. 1B and fig. S1, C and D). Their neutralizing activity was assessed in single round infections with replication-deficient vesicular stomatitis virus (VSV) ΔG eGFP pseudotyped with SARS-CoV-2 spike Δ18. Four nanobodies, VHH E derived from the llama, and VHHs U, V, and W from the alpaca, potently neutralized infection in a dose-dependent manner, with an IC50 value of 60 nM for the most potent nanobody, VHH E (Fig. 1C and fig. S1, E and F). The neutralizing activity of VHH E is thus similar to bivalent recombinant ACE2-Fc. Three nanobodies from a synthetic library did not neutralize (14), while neutralizing activity of nanobody Ty1 (15) was confirmed. As a monomer, SARS-CoV-1-specific nanobody VHH 72 (16), neutralized SARS-CoV-2 pseudotyped virus at concentrations above 1 μM (Fig. 1C), but potently inhibited SARS-CoV-1 pseudotyped virus at nanomolar concentrations (fig. S1G). None of the four nanobody hits neutralized SARS-CoV-1 pseudotyped virus (fig. S1H). Plaque reduction neutralization tests (PRNTs) with SARS-CoV-2 on Vero E6 cells confirmed the neutralizing activity, yielding IC50 values ranging from 48 to 185 nM (Fig. 1D). We further validated virus neutralization microscopically by quantifying the replication of an mNeonGreen expressing clone of SARS-CoV-2 on human Caco2 cells in the presence of nanobodies over time (fig. S1I and movies S1 to S7). We measured binding affinities of the VHHs to the RBD by surface plasmon resonance (SPR) (Fig. 1E and fig. S1J) and obtained dissociation constants of 2 nM (VHH E), 21 nM (VHH U), 9 nM (VHH V) and 22 nM (VHH W) in the kinetic mode (table S1). An SPR-based binding competition assay revealed that the nanobodies bind to two distinct regions: U, V, and W competed for the same binding interface on RBD (interface UVW), while VHH E binds to a different RBD interface (interface E), and could bind to the RBD at the same time as U, V, or W (Fig. 1F).

Fig. 1 Camelid nanobodies against two epitopes on SARS-CoV-2 Spike RBD neutralize infection.

(A) Average distance tree of nanobody candidates identified by phage display, calculated by percentage identity (66). (B) Binding of 100 nM HA-tagged VHHs to immobilized SARS-CoV-2 spike RBD or control protein MBP was quantified by ELISA with HRP-coupled anti-HA. Unrelated VHH SN was used as a negative control. (C) SARS-CoV-2 spike pseudotyped VSV ΔG eGFP was incubated with the indicated concentrations of HA- or LPETG-tagged (VHH LaM-4, VHH 72) VHHs or ACE2-Fc at 37°C for 1 hour, followed by infection of Vero E6 cells for 8 hours. eGFP-positive cells were measured by flow cytometry to quantify infection. Normalized values from three independent experiments ± SEM and IC50 values are plotted. (D) SARS-CoV-2 was incubated with the indicated concentrations of HA- or LPETG-tagged VHHs as in (C), followed by plaque assay on Vero E6 cells. Plaques were enumerated 3 days post infection and normalized values of three independent experiments ± SEM and IC50 values are plotted. (E and F) Biotinylated SARS-CoV-2 spike RBD was immobilized on surface plasmon resonance spectroscopy chips. (E) Indicated HA-tagged VHHs were injected for 90 s, followed by dissociation for 120 s. Dissociation constants (KD) were determined based on fits applying a 1:1 interaction model. (F) Epitope binning was performed by first injecting a single VHH for 120 s, followed by injection of 1:1 mixtures of the first nanobody in combination with VHH E, U, V, or W for 80 s.

Binding epitopes of neutralizing VHHs on the spike RBD

We next determined X-ray crystal structures of complexes of VHH E and VHH U with SARS-CoV-2 RBD at 1.87 Å (Fig. 2, A to C), VHH V with RBD and Fab CC12.3 (9) at 2.55 Å (Fig. 2, D and E), and VHH W with RBD and Fab CC12.3 at 2.73 Å (fig. S2, A and B) (table S2). VHH E and U bind to distinct epitopes on the RBD (Fig. 2A). VHH E employs its complementarity determining region (CDR) 1 and its unusually long CDR3 (22 amino acids) to bind the ACE2 binding site on the RBD (Fig. 2B). The VHH E epitope is similar to that of potent SARS-CoV-2 neutralizing antibodies, including CC12.3 (17), H11-D4 (18) as well as nanobodies MR17 and SR4 (19) (fig. S2C). Notwithstanding, VHH E binds in an orientation that markedly differs from other neutralizing nanobodies (fig. S2C). Its CDR3 adopts an extended beta-hairpin conformation that inserts into the receptor binding site (RBS) using both polar and hydrophobic interactions as well as bridging water molecules (Fig. 2B). The flexibility of CDR3 is confined at one end by a disulfide bond between cysteine 50 in CDR2 and cysteine 100h (Kabat numbering) in the CDR3 that is involved in a hydrophobic and aromatic patch that interacts with the RBS (fig. S2H). 16 of 27 epitope residues that bind VHH E are also involved in ACE2 binding (Fig. 2B) (20).

Fig. 2 X-ray crystallography defines the binding sites of neutralizing VHHs on the SARS-CoV-2 RBD.

(A to C) Crystal structure of SARS-CoV-2 spike RBD in complex with VHH E and VHH U at 1.87 Å (A) and detailed interaction interface of RBD (in white) with VHH E (B) and RBD with VHH U (C), respectively. (D and E) Crystal structure of SARS-CoV-2 spike RBD in complex with VHH V at 2.55 Å (D) and detailed interaction interface of RBD with VHH V (E). Escape mutants (see Fig. 5 and tables S5 to S8) in the RBD are highlighted in sea blue and labeled with asterisks. (F) Overview of binding sites of all four neutralizing nanobodies on the RBD and their overlap with ACE2 based on PDB: 6M0J (67). Steric clashes with VHH E are indicated within the dashed circles. N-glycans on ACE2 N322 and N546 are visualized as yellow spheres. All structural analyses of VHH U and VHH E in complex with RBD were based on one of the two copies in the asymmetric unit with closer alignment to the localized-reconstructions of VHH E with RBD and VHH VE with RBD using cryo-EM.

Although VHH U binds to a distinct epitope on the RBD, it should also compete with ACE2 for binding to the RBD due to clashes with the ACE2 protein and with the glycans at N322 and N546 of ACE2 (Fig. 2F and fig. S2D). VHH U uses all three CDRs to bind the RBD. CDR3 is tethered to CDR2 by a disulfide bond between cysteine 100b and cysteine 50 that creates two distinct loops in a flat, bi-lobed CDR3 that interact with the RBD (fig. S2H). The epitope of VHH U overlaps with the binding site of SARS-CoV-1 neutralizing antibody CR3022 (17) and VHH 72 (16) (fig. S2C). While most residues involved in the interaction of the SARS-CoV-2 RBD with VHH U are identical in the SARS-CoV-1 RBD, VHH U does not neutralize SARS-CoV-1 (fig. S1H). In agreement with the neutralization data, fluorescently labeled VHH U binds to SARS-CoV-2 spike transiently expressed on HEK 293T cells, but not to SARS-CoV-1 spike (fig. S2G). SARS-CoV-1 spike N357 is part of an NxT sequon for N-glycosylation, whereas the corresponding SARS-CoV-2 N370 is not glycosylated. Binding to SARS-CoV-1 spike is partly restored when threonine 359 is mutated to alanine and the sequon is eliminated, suggesting that differential glycosylation contributes to different binding properties (fig. S2G). Binding of VHH E and U does not substantially alter the overall RBD fold (Cα RMSD = 0.37 Å between RBDs bound by E and U, and ACE2).

VHH W adopts a structure that is similar to VHH U (Cα RMSD = 0.48 Å) and engages the RBD in the same way (Fig. 2A and fig. S2, A and F), consistent with the finding that 6 of the 7 amino acid differences between the two nanobodies occur in the framework and are not involved in binding. Although VHH V binds to a similar epitope as VHH U and W, it is oriented differently on the RBD. In this case, CDR3 is mainly involved in the binding, and no major changes in the overall RBD structure were observed upon VHH V binding. Binding of VHH V is also expected to compete with ACE2 binding due to a steric clash with the glycan at N322 and potentially at N546 of ACE2 (Fig. 2F and fig. S2D). To confirm that nanobody binding to the RBD does compete with ACE2 binding on the plasma membrane, we performed a flow cytometry-based competition assay and quantified binding of fluorescently labeled RBD to ACE2-expressing HEK 293T cells (fig. S2E). ACE2 binding was indeed outcompeted by all neutralizing VHHs in a dose-dependent manner with VHH V being slightly less potent than the others.

Neutralizing nanobodies stabilize the SARS-CoV-2 spike in the RBD-up conformation

The RBDs exist in an equilibrium of up and down conformations in the context of the trimeric spike on virions. Most unperturbed spike trimers exist in the configuration with no or one RBD up, while the 3-up conformation is barely populated (6, 7, 21). Only the up conformation of the RBD is compatible with ACE2 (22) binding, which likely induces further conformational changes that favor secondary proteolytic cleavage, dissociation of the S1 subdomain, and eventually conversion to the post-fusion conformation (23). However, it is unknown how many RBDs must be in the up conformation to permit each of these transitions. To further interrogate the mechanism of action of the identified neutralizing nanobodies, we determined structures of the soluble, trimeric spike complex bound to individual nanobodies using cryo-electron microscopy (cryo-EM) (6, 24). To stabilize the pre-fusion conformation, mutants of spike lacking the furin cleavage site and containing stabilizing proline substitutions were used throughout this study (6). Our initial analysis focused on one representative nanobody for each of the two identified epitopes. Ab initio reconstruction of VHH E bound to the trimeric spike revealed that the predominant complex (61%) contained all RBDs in the up conformation (3-up) with all three VHH E binding sites populated (Fig. 3, A and B, and figs. S3 to S5). The remaining particles resulted in very low-resolution structures without any density for VHH E. Spike structures containing one or more RBDs in the down conformation were not compatible with binding of three molecules of VHH E, as substantial clashes with the spike glycans or between VHHs were observed when the VHH E structures were modeled into different spike quaternary structures (fig. S6). This finding suggests that binding of VHH E stabilizes (or induces) the 3-up conformation by trapping the RBD in the up-state. Once bound to VHH E, the RBD is unable to access the down conformation.

Fig. 3 Cryo-electron microscopy structures reveal that VHHs stabilize SARS-CoV-2 spike trimers with RBDs in the up conformation.

Cryo-EM reconstructions (A an C) and atomic models (B and D) of VHH E (A and B) and VHH V (C and D) in complex with trimeric SARS-CoV-2 spike. Frequencies of the identified complexes as well as total numbers of considered particles are mentioned. (A and B) VHH E (in green) binds to SARS-CoV-2 in a 3-up conformation in the most abundant complex; the resolution is 3.3 Å (0.143 FSC). (C and D) VHH V (in red) binds to SARS-CoV-2 in a 2-up conformation with all VHH binding sites occupied at a resolution of 3.0 Å. In the most abundant complex, VHH V binds to the RBD in the up- or the down-conformation. (E and F) HEK 293 cells inducibly expressing SARS-CoV-2 S Δ18 and either eGFP or tagRFP-t were seeded into microscopy-grade 96-well plates in a 1:1 ratio and induced with 1 μg/mL doxycycline for 20 hours. Cells were treated with 1 μM of the indicated VHHs and microscopy images were recorded every 20 min for 14 hours at 37°C. (E) Fusion was quantified by calculating Pearson correlation coefficients (PCC) between eGFP and tagRFP-t. Average values from 4 fields of view of an experiment representative of 3 independent experiments are displayed. (F) Representative images of cells 12 hours post treatment are displayed (also see fig. S13 and movies S8 to S13). Scale bars represent 100 μm.

The cryo-EM structure of trimeric spike in complex with VHH V revealed that the predominant complex (42% of observed structures) had all three RBDs bound by VHH V (Fig. 3, C and D, and figs. S7 to S9), with two RBDs in the up conformation and one in the down conformation. To accommodate three molecules of VHH V, one of the RBDs in up conformation was displaced by 8 Å, and the RBD in the down conformation was displaced by 11 Å, when compared to the 2-up 1-down conformation without nanobodies (25) (figs. S10 and S11). The remaining complexes did not contain VHH V. Apart from the RBD state, the overall structure of the trimeric spike was not substantially changed by any of the nanobodies. However, VHH E and VHH V altered the abundance of spike-trimer conformational states, and the cryo-EM structures confirmed the binding modes as identified by macromolecular crystallography. Molecular modelling of the VHH V - RBD interface revealed no differences to the crystallographic structure. A small backbone difference in RBD residues 446-451 in the interface with VHH E was noted, albeit in different resolution structures and in different complexes (fig. S12A).

Neutralizing nanobodies trigger activation of the fusion machinery

ACE2 can only bind to RBDs in the up-conformation and is expected to trigger conformational changes required for secondary proteolytic processing and fusion. Premature activation of these steps will inactivate the fusion machinery, as the energetically favored post-fusion conformation is irreversible. To test whether stabilization of the RBDs in the up-conformation by nanobodies activates the fusion machinery, we generated a HEK 293-based cell line that can be induced to express the SARS-CoV-2 spike protein on the cell surface. We further generated derivative cell lines that additionally and constitutively express either eGFP or tagRFP-t. Since HEK 293 cells do not express the cognate receptor ACE2, the SARS-CoV-2 spike is not expected to mediate cell-cell fusion. We mixed the green and red fluorescent cell lines at an equal ratio, treated them with nanobodies, and recorded cells by fluorescence microscopy during 14 hours (Fig. 3, E and F, and fig. S13, A and B). Cell-cell fusion, as a macroscopic readout for activation of the viral spike protein, would result in cells containing both eGFP and tagRFP-t. Untreated cells, or cells treated with control nanobodies, did not fuse or exhibit any signs of toxicity. However, incubating spike-expressing cells with VHH E, U, or W, resulted in cell-cell fusion as quantified by mixed eGFP and tagRFP-t fluorescence (Fig. 3F). VHH-induced fusion was particularly prominent for VHH U and W, resulting in fusion of all cells in the field of view, and was somewhat weaker for VHH E. VHH V barely induced fusion, while no fusion was observed in the presence of VHH Ty1. Stabilization of the RBD up-conformation by neutralizing nanobodies may thus favor conformational changes that mediate fusion. Furthermore, we analyzed fusion between ACE2 and SARS-CoV-2 spike expressing cell lines (fig. S14). Upon induction of spike expression, near complete cell-cell fusion was observed within 12 hours. When expression was induced in the presence of VHH E, spike-ACE2-mediated fusion was reduced to 50%, consistent with VHH E binding to the ACE2 binding site. No inhibition was observed in the presence of control nanobodies, or in the presence of VHHs U, V, W, or Ty1. This fusion assay therefore recapitulated the results of the infection-based neutralization assays.

It remains unclear whether nanobody binding is sufficient to induce fusion directly, or whether it rather facilitates secondary proteolytic processing of spike as necessary for fusion. VHH E-induced fusion was partly inhibited by a protease inhibitor cocktail (fig. S13), suggesting that extracellular or membrane-associated proteases may be involved in the VHH-triggered fusion, as described for ACE2-triggered fusion by SARS-CoV-1 spike (26). It is thus possible that VHH binding mimics binding of ACE2 to the spike protein and exposes otherwise inaccessible protease cleavage sites. Regardless of the exact mechanism, only neutralizing nanobodies were found to trigger spike-mediated cell-cell fusion, suggesting that aberrant activation of the fusion machinery is involved in the mechanism of neutralization.

Multivalent VHH fusions potentiate neutralization of SARS-CoV-2

In the course of the natural adaptive immune response, viruses face a polyclonal antibody response, which may enhance neutralizing activity by additive or synergistic effects (27). To test whether the four neutralizing nanobodies act synergistically, we compared the neutralizing activity of combinations of individual nanobodies. For direct comparison, we established starting concentrations of the individual nanobodies that led to similar dose-response curves in a two-fold dilution series (Fig. 4A and fig. S15A). We then compared neutralizing activities of the individual nanobodies with mixtures of nanobodies containing 50% of the concentration of each nanobody combined. Combinations of nanobodies competing for the same epitope (VHHs U and V, U and W, or V and W) exhibited additive inhibition, i.e., mixtures containing half the concentrations of two nanobodies neutralized to the same extent as the individual nanobodies alone at full concentration (Fig. 4A and fig. S15A). However, when nanobodies binding to different epitopes were combined (VHHs E and U, E and V, or E and W), mixtures containing 50% of the two VHHs neutralized more efficiently than 100% of each of the individual nanobodies. Combinations of nanobodies that bound to independent epitopes were also more potent in preventing SARS-CoV-2 mNeonGreen replication in human cells (Fig. 4B and fig. S15B).

Fig. 4 Multivalent VHH fusions potentiate neutralization of SARS-CoV-2.

(A) SARS-CoV-2 spike pseudotyped VSV ΔG eGFP was incubated with 2-fold serial dilutions of 0.25 μM VHH E, 1 μM VHH U, 1 μM VHH V or the indicated combinations containing 50% of each VHH at 37°C for 1 hour. Vero E6 cells were subsequently incubated with the mixtures and infection quantified as in Fig. 1B. Normalized values from three independent experiments ± SEM are plotted. (B) Caco-2 cells were infected with mNeonGreen-expressing icSARS-CoV-2-mNG in the presence of the indicated nanobody concentrations. Cells were fixed 48 hours p.i., stained for DNA, and infection was quantified by microscopy. Normalized values from three independent experiments ± SEM are plotted. (C and G) SARS-CoV-2 spike pseudotyped VSV ΔG eGFP was incubated with the indicated concentrations of HA-tagged single, bivalent, or trivalent VHHs at 37°C for 1 hour, followed by infection of Vero E6 cells as in Fig. 1C. Normalized values from three independent experiments ± SEM and IC50 values are plotted. (D and H) SARS-CoV-2 was incubated with the indicated concentrations of HA-tagged VHHs, followed by plaque assay on Vero E6 cells as in Fig. 1D. Normalized values of three independent experiments ± SEM and IC50 values are plotted. (E and F) Cryo-EM reconstruction (E) and atomic models (F) of VHH VE in complex with trimeric SARS-CoV-2 spike. Frequencies of the identified complexes as well as total number of considered particles are mentioned. The biparatopic VHH binds to SARS-CoV-2 in the 3-up conformation; the resolution is 2.62 Å (0.143 FSC). (I and J) HEK 293 cell lines inducibly expressing SARS-CoV-2 S Δ18 and either eGFP or tagRFP-t were treated with the indicated VHHs and analyzed as in Fig. 3, E and F, displaying quantified fusion (I), as well as representative images after 12 hours (J). Also see fig. S22 and movies S14 to S22). Scale bars represent 100 μm. (K) HEK 293T cells expressing ACE2-tagRFP-t were incubated with DyLight 488-labeled SARS-CoV-2 spike RBD in the presence of the indicated concentrations of nanobodies. RBD bound to ACE2-positive cells was quantified by flow cytometry. Normalized data from three independent experiments ± SEM are plotted. Data presented in fig. S2E and Fig. 4K are from the same experiment and values for VHHs E, V, and LaM-4 in fig. S2E are plotted as a reference.

These results suggest that targeting multiple epitopes may be beneficial to interfere with infection. Thus, we produced multivalent nanobody fusions linked by flexible linkers, capitalizing on the relatively unrestrained N- and C-termini of VHHs. Based on a superimposition of complex structures VHH E and VHH V binding to the same RBD, we determined that the C terminus of VHH V and the N terminus of VHH E were close enough (33 Å) to allow fusion with a 15 aa long (GGGGS)3 linker (VHH VE) (28). The distance between the C terminus of VHH E and the N terminus of VHH V, in contrast, was estimated to be greater than the length of a 15 aa linker. The reverse construct (VHH EV) with a (GGGGS)3 linker was thus expected to either bind to two different RBDs within a trimeric complex, to only employ one of its binding sites, or to induce some strain or distortion on the targeted RBD. The biparatopic nanobodies VHH VE and EV were produced in bacteria, purified and subsequently subjected to SPR analysis (fig. S15C). With apparent dissociation constants of 84 pM (VE) and 200 pM (EV), the biparatopic nanobodies bound to the RBD 22- and 9-fold stronger, respectively, than the best monoparatopic VHH (VHH E). While we also confirmed binding to trimeric spike (fig. S15D), the complex binding behavior precluded the application of standard affinity-calculation models. In neutralization assays with SARS-CoV-2 S pseudotyped VSV, we found that VE or EV neutralized with IC50 values of 4.1 or 2.9 nM, i.e., 12 or 18 times better than VHH E alone, respectively (Fig. 4C). We observed similar values for the biparatopic fusions VHH EW and WE (fig. S15E). Neutralizing activity of VHH fusions as measured by PRNT with wild type SARS-CoV-2 was improved even more, attaining IC50 values of 0.7 nM for EV and 1.32 nM for VE (Fig. 4D).

Through examination of the cryo-EM reconstructions of VE in complex with trimeric spike (Fig. 4, E and F, and figs. S16 and S17), we observed that the biparatopic VHH VE stabilized all RBDs in the up conformation, and all six VHH binding sites were occupied on the spike. This configuration was found in 41.5% of all complexes; the remaining spike complexes did not contain any VHH (fig. S18). Although the linker itself was not visible, the 15 aa linker length between VHH V and E is only compatible with the observed distance between the C terminus of VHH V and the N terminus of VHH E on the same RBD (35 Å) (28), but not between VHH V and E on different RBDs (>80 Å) (fig. S19). Through localized reconstruction techniques, we were able to obtain a map of the VHH VE-RBD region of the full spike that enabled molecular modelling. Interestingly, the small difference in the backbone around Y449 observed in the localized reconstruction of the VHH E-RBD structure now corresponded in VHH VE-RBD to the conformation seen in the high-resolution X-ray structure of RBD VHH E and VHH U (fig. S12B). These differences hint at possible allostery between the two epitopes, but this is not possible to determine with certainty given the resolution of the present EM reconstructions in the two areas. Complexes of the spike trimer with VHH V alone (Fig. 3, C and D) contained two RBDs in the up-conformation and one in the down conformation. Hence, the formation of a 3-up spike trimer is dependent on the inclusion of VHH E in the biparatopic VHH VE complex (fig. S20).

The cryo-EM structures of VHH E in complex with the trimeric spike suggested that three RBDs in the up conformation could also be bound by multivalent fusions of VHH E. We thus produced VHH EE and VHH EEE connected by GS-rich linkers of 15 aa length and similarly tested their neutralizing activity. VHH EE and VHH EEE neutralized VSV ΔG eGFP (SARS-CoV-2 S) with IC50 values in the pM range (930 and 520 pM, respectively) (Fig. 4G). IC50 values in PRNT with wild type virus were even lower, reaching 180 and 170 pM for VHH EE and EEE, respectively (Fig. 4H). We also tested VHH VV and found that it binds RBD with higher apparent affinity than VHH V alone (fig. S15C). Yet, VHH VV improved neutralizing activity only modestly (fig. S15F), possibly because VHH VV is not expected to simultaneously bind different RBDs within the trimeric spike.

Monovalent, multivalent and biparatopic nanobodies boost SARS-CoV-2 neutralization by distinct mechanisms

Next, we explored the mechanism by which multivalent nanobodies enhance the neutralizing activity of individual nanobodies. We first tested whether multivalent nanobodies outcompeted binding of fluorescently-labeled RBD to ACE2-expressing HEK 293T cells (Fig. 4K). VHHs EE and EEE reduced binding to RBD better than VHH E alone, suggesting that the increased (apparent) affinity of these nanobodies may better prevent virus binding to receptor than VHH E. While VHHs EE and EEE exhibit a 3-fold lower IC50 than VHH E in the RBD competition assays, it is possible that other factors contribute to the 100-fold better neutralizing activity. VHHs VE and EV did not compete with RBD-ACE2 interactions substantially better than VHH E alone. Hence, we conclude that their improved neutralizing activity must be explained by other mechanisms.

We next tested whether incubation of SARS-CoV-2 spike expressing cells with multivalent nanobodies triggers spike-mediated cell-cell fusion in the absence of ACE2 as observed for VHHs E, U, and W (Fig. 4, I and J). VHHs EV and VE caused extensive cell-cell fusion, clearly exceeding the fusogenic activity of the individual nanobodies alone. VHHs EW and WE caused a similar degree of cell-cell fusion. We conclude that binding of VHHs EV, VE, EW, and WE to the spike potently induces conformational changes required for fusion. Moreover, the enhanced fusogenic activity of EV and VE correlates with the improved neutralizing activity over VHH E, which could not be explained by ACE2 competition. In VHH-mediated cell-cell fusion assays, cells were treated with nanobodies one day after induction of spike expression, exposing a large number of spike trimers at the cell surface at the onset of the experiment, including sites in close proximity to membranes of neighboring cells. Activation of spikes likely catalyzed cell-cell fusion. During neutralization of virions, however, nanobodies bind to spike on virions in the absence of target membranes. Premature activation of this metastable state thus cannot facilitate infection, but rather irreversibly converts the spike into the post-fusion conformation precluding bona fide fusion events upon host cell contact.

The homobivalent and homotrivalent VHHs EE and EEE did not induce fusion despite a substantial boost in neutralizing activity, suggesting that binding of multiple covalently coupled nanobodies to the same epitope is not compatible with induction of fusion. To test if cross-linking of individual spike promoters itself interferes with fusion, we incubated spike expressing cells with fusogenic VHH U and a three-fold molar excess of VHH EEE (fig. S22). Yet, VHH U-mediated fusion was not restricted by VHH EEE. Fusion induced by VHH E, however, was inhibited by bivalent VHH VV, demonstrating that VHH binding can interfere with fusion in other ways, perhaps by preventing 3-up conformations.

In addition, we tested whether multivalent nanobodies interfered with fusion of SARS-CoV-2 spike and ACE2-expressing cells. We induced spike expression at the onset of the experiment and, therefore, newly synthesized spike that arrived at the plasma membrane faced an excess of nanobodies. Depending on the neutralization potential and the concentration of nanobodies, this may induce premature activation of spike by nanobodies, or interfere with binding of spike to ACE2, recapitulating the setup of neutralization assays. In line with the previously determined IC50 values, we found that fusion was partly inhibited by VHHs EE, EEE, EV, and VE (fig. S21). VHH VV did not inhibit fusion, while VHHs EW and WE had intermediate phenotypes. ACE2-mediated fusion assays therefore demonstrated that only the most potent neutralizing nanobodies interfered with spike-ACE2-triggered fusion at the used concentration.

Targeting two independent vulnerable epitopes on the RBD prevents viral escape

In the course of prolonged infections or therapeutic settings, viruses with escape mutants emerge, that evade recognition and thus neutralization by specific antibodies. We experimentally tested if combinations of nanobodies targeting distinct epitopes, or our biparatopic nanobodies, increased resistance to escape mutants (see details in the “extended results” in the supplementary information). Briefly, we generated a chimeric, replication-competent, VSV strain that expresses eGFP and encodes SARS-CoV-2 spike Δ18 instead of its own glycoprotein (VSV eGFP SARS-CoV-2 S, see Fig. 5A) (2931). Vero E6 cells were infected with the chimeric virus in the presence of increasing concentrations of nanobodies or nanobody combinations, and cultivated for four days (Fig. 5B). Virus from the wells with the highest nanobody concentration that still allowed replication (>10% infected cells) was collected and used for a second round of selection (Fig. 5C). Viral RNAs were extracted from infected cells after both rounds of selection and analyzed by next-generation sequencing (NGS) to identify emerging variants (Fig. 5, D and E). No mutations occurred in the presence of control nanobody VHH LaM-4. In the presence of VHH E, U, V, and W, replication at neutralizing concentrations was observed in the first round, and more than 85% of all viral sequences exhibited mutations in the structurally-defined interfaces E or UVW, respectively. Replication in the second round was seen at all nanobody concentrations, and nearly all sequences contained non-synonymous mutations in the nanobody epitope, indicating rapid selection for escape mutants. Particularly prominent were escape mutations F490S or S494P in the VHH E interface, as well as S371P and K378Q in the UVW interface, which are expected to compromise the structurally defined VHH:RBD interface (see “extended results” in the supplementary information). We identified further mutations in interfaces E (G447S, Y449H/D/N, L452R, F490S, S494P/S, G496S, and Y508H) and UVW (Y369H, S371P, F374I/V, T376I, F377L, and K378Q/N) in this and a separate evolution experiment (tables S5 to S8).

Fig. 5 Simultaneous targeting of two independent epitopes with neutralizing VHHs prevents viral escape.

(A) Genome structure of VSV SARS-CoV-2 S Δ18 eGFP. (B to E) Evolution experiment. (B) Replication-competent VSV SARS-CoV-2 S Δ18 eGFP at an MOI of 0.5 was incubated with different concentrations of the indicated VHHs and allowed to replicate on Vero E6 cells in 12-wells for 4 days. The fraction of infected (eGFP positive) cells and CPE was estimated microscopically and is plotted according to the indicated color code. (C) Cleared supernatants from the wells indicated with a light circle in (B) were diluted 1:5 and used for a second round of replication on Vero E6 cells in the presence of the indicated VHH concentrations. Cleared supernatants were harvested as in (B). (D and E) Cell lysates from the wells indicated by circles in light color in B (D) and C (E) were subjected to targeted resequencing of the RBD, to identify variants that had emerged at the interfaces to VHH E (Interface E) or to VHH U, V, or W (Interface UVW), and to quantify their allelic distribution (see tables S5 and S6 for details on detected variants). (F and G) Wild type VSV SARS-CoV-2 spike eGFP or plaque-purified escape mutants of VHH E (S1-1f, Spike S494P), VHH U (S1-2h, Spike S371P), VHH V (S1-3b, Spike K378Q), VHH W (S1-4a, Spike S371P), and VHH LaM-4 (S1-10a, wt spike) at an MOI of 0.5 were incubated with the indicated VHH concentrations (F) or 1 μM of the indicated VHH (G), and used for Vero E6 infection experiments as described in Fig. 1B. Infection was quantified by flow cytometry and normalized data from three independent experiments ± SEM are plotted. (n.d., not detected).

Individual escape mutants encoding spike mutants S494P (VHH E), S371P (VHH U/W), and K378Q (VHH V) were plaque purified and thoroughly characterized (fig. S23, A and B). As expected, spike S494 mutants were resistant to VHH E and VHH EEE, while spike mutants S371P and K378Q were resistant to VHHs U, V, and W (Fig. 5, F and G). Escape mutants resistant to one VHH were systematically more sensitive to VHH EV and VE than to a single nanobody that could still bind to their RBD. This finding suggests that residual binding to the mutated interface may still contribute to neutralization. Ectopically expressed mutants of SARS-CoV-2 spike were no longer stained by fluorescently-labeled VHHs targeting the affected epitope, indicating that the detected mutations alone explained loss of sensitivity (fig. S23C).

Combinations of VHH E+U, E+V, and E+W did not allow the emergence of escape mutants that were resistant to both nanobodies in the second round of selection (Fig. 5C). Nevertheless, virus with mutations in at least one interface was enriched, and sequences containing mutations in both interfaces were detected after two rounds of replication in presence of VHH E+W (Fig. 5E). Replication in the presence of VHH EEE or combinations of VHH U and V allowed the rapid emergence of escape mutations with nearly completely mutated interfaces in the first round of selection (Fig. 5D). Emerging virus was consequently able to replicate at all nanobody concentrations in the second round (Fig. 5C).

No virus resistant to biparatopic VHHs EV and VE emerged during two rounds of selection (Fig. 5C). While VHH VE did not lead to the accumulation of any mutations, VHH EV selected for virus mutated in the E interface (Fig. 5E). The evolution experiments clearly demonstrate that simultaneous targeting of two neutralizing epitopes severely hampers or prevents emergence of escape mutants. A single point mutant was sufficient to escape the most potent homotrivalent nanobody VHH EEE.


Nanobodies represent a versatile alternative to conventional antibodies for passive immunization against SARS-CoV-2. They are efficiently produced in prokaryotic expression systems at low cost, exhibit favorable biophysical properties including high thermostability, and are amenable to engineering of multimeric nanobody constructs with additional benefits (3, 32).

This study identifies four novel neutralizing nanobodies targeting the RBD of SARS-CoV-2 spike from immunized camelids and demonstrates their inhibitory activity in different in vitro infection models. The described set of nanobodies joins a growing list of neutralizing nanobodies (11, 12, 1416, 18, 19, 25) that have been mostly selected from synthetic libraries or derived from immunizations with related coronaviruses. Without further in vitro evolution, nanobodies isolated from synthetic libraries often exhibit lower affinities than nanobodies selected by the adaptive immune system of immunized animals. Neutralizing nanobodies raised against other coronaviruses are typically not potent toward SARS-CoV-2 as monovalent molecules. Here, we have rationally designed multivalent nanobody constructs based on epitope mapping data by SPR and X-ray crystallography, as well as extensive information on the conformation of spike:nanobody complexes determined by cryo-EM. By using additional functional data on the synergistic behavior of individual nanobody combinations, we developed two classes of nanobody fusions. First, multivalent nanobodies targeting the ACE2 binding site on the RBD (VHH EE and VHH EEE) likely interfere with virus attachment, but can be overcome by single point mutations. Second, biparatopic fusions of two nanobodies targeting the non-overlapping binding interfaces E and UVW potentiate neutralization by activating SARS-CoV-2 spike. On virions, premature activation likely induces the conversion to the thermodynamically favorable post-fusion conformation without catalyzing a fusion event, a process that is irreversible and that is also naturally observed for a fraction of spike trimers on intact SARS-CoV-2 virions (21, 33, 34). Similar phenomena, albeit mostly observed in biochemical experiments, were proposed for the SARS-CoV-1-neutralizing antibodies S230 (35) and CR3022 (36), and MERS-CoV-neutralizing nanobody Mersmab1 (37). Simultaneous binding of VHH VE to the E and UVW interfaces may involve additional conformational changes not revealed on the unprocessed spike used for EM, possibly facilitating proteolytic processing of S2 to S2’, or bona fide dissociation of S1 from the SARS-CoV-2 spike. Differential sensitivities to protease inhibitors of cell-cell fusion triggered by VHH E and VE warrant more in-depth analysis of the required proteases.

The identification of three nanobodies (VHH E, U, and W) – with two different binding modes targeting independent epitopes that activate the SARS-CoV-2 fusion machinery – suggests that this mode of action may be more common than appreciated. Different coronaviruses either employ the N- or the C terminus of the S1 subunit for receptor engagement and activation of fusion by proteinaceous or carbohydrate receptors, suggesting that the spikes of coronaviruses have evolved a remarkable flexibility with regards to activation of the fusion machinery (38). It is conceivable that such promiscuity is achieved by a mechanism that primarily warrants enhanced susceptibility to secondary proteolytic cleavage to form the S2’ subunit with an exposed fusion peptide, rather than initiating all of the necessary conformational changes required for fusion per se.

The mechanism of fusion activation may have clinical implications, as current models of ADE explain how virus-antibody complexes are taken up by cells expressing Fcγ receptors (37, 39), but fail to explain how the second function of spike-receptor interactions, i.e., the induction of fusion, is realized. If engagement of the RBD (or S1) by antibodies or nanobodies is sufficient to activate the spike protein, fusion in the absence of cognate receptors and, thus, ADE is more likely to occur. Nanobodies lack the Fc portion and thus would represent a safe alternative to antibodies, as they cannot be engaged by scavenging receptors to mediate recruitment and uptake of virions into phagocytic cells. The serum half-life of nanobodies can be extended by chemical modification with polyethylene glycol, fusion to human serum albumin (HSA), or by fusion to peptides or proteins that bind to HSA with high affinity (40).

We predict that bivalent or trivalent fusions described in this study will also increase the neutralizing potential in vivo. The substantial delay or prevention of escape mutations to biparatopic nanobodies in vitro may translate to better performance in vivo as well. The application of nanobodies by inhalation directly to the site of infection may further reduce the required dose, and is also substantially easier to realize outside of medical facilities (4143). Due to their similarity to the variable domains of the heavy chain of human antibodies, VHHs are generally expected to be less immunogenic than synthetic antibody-like molecules (44), and can be further humanized (45). In clinical studies of the FDA-approved nanobody caplacizumab, immunogenicity of nanobodies occurred in 3% of all patients with no effects on clinical efficacy (46).

The structure-based multivalent nanobodies we present have strong potential clinical applications owing to increased neutralizing activity and in-built protection from rapid emergence of escape mutants. We show that premature activation of the spike can be a mechanism for neutralization and thus the generated nanobodies may also shed more light into the mechanism of fusion itself.

Materials and methods

Cell lines

Syrian baby hamster kidney (BHK)-21 cell clone BSR-T7/5 (Mesocricetus auratus, RRID:CVCL_RW96, a kind gift of Sean Whelan, Harvard Medical School), human embryonic kidney (HEK) 293T cells (ATCC Cat# CRL-3216, RRID:CVCL_0025), and African green monkey Vero E6 cells (Chlorocebus sabaeus, RRID:CVCL_0574, a kind gift of Ralf Bartenschlager, University of Heidelberg) were cultivated in DMEM containing 10% FBS and GlutaMax; human colorectal adenocarcinoma Caco-2 cells (RRID:CVCL_0025) were cultured in DMEM complemented with 10% FBS, 2 mM l-glutamine, 100 μg/mL penicillin/ streptomycin (PS), and 1% non-essential amino acids (NEAA). Flp-In 293 T-REx cells (Thermo Fisher Scientific Cat# R78007, RRID:CVCL_U427) inducibly expressing SARS-CoV-2 spike Δ18 with a C-terminal Strep2-HA tag (HEK 293 SARS-CoV-2 spike Δ18) were generated using the Flp-In system (Thermo Fisher Scientific) according to the manufacturer’s recommendations, and cultivated in DMEM supplemented with 10% FBS, Glutamax, 4 μg/mL blasticidin S, and 50 μg/mL hygromycin B. Derivatives of HEK 293 SARS-CoV-2 spike Δ18 cells expressing eGFP or tagRFP-t under the control of CMV promoters were generated using customized gateway-compatible lentiviral vectors based on pRRL (47), and cultivated in DMEM supplemented with 10% FBS, Glutamax, 4 μg/mL blasticidin S, 50 μg/mL hygromycin B, and 1 μg/mL puromycin. HEK 293T cells expressing ACE2-tagRFP-t under the control of the EF1α promoter were also generated using a pRRL-based lentiviral vector, and cultivated in DMEM supplemented with 10% FBS, Glutamax, and 50 μg/mL hygromycin B.


All experiments involving the authentic virus were conducted in Biosafety Level 3 laboratories. SARS-CoV-2 clinical isolate SARS-CoV-2/human/Germany/Heinsberg-01/2020 was isolated from a throat swap of an infected patient at the University of Bonn, Germany, and was used for plaque reduction assays (48). To prepare larger stocks of virus, Vero E6 cells were infected with SARS-CoV-2 at a multiplicity of infection (MOI) of 0.01. Supernatants were harvested 2 days post infection (p.i.), cleared by centrifugation, and quantified by plaque assay. To prepare inactivated virus for camelid immunizations, virus was produced in cells covered with Opti-MEM: Clarified supernatants containing virus were mixed with 37% formaldehyde to obtain a final concentration of 4% formaldehyde and incubated at 4°C for 4 hours. The virus suspension was overlaid on 7 ml of a 30% sucrose cushion in 20 mM Hepes pH 7.4, 150 mM NaCl and virions were sedimented by ultracentrifugation in a SW 32 TI rotor at 4°C, 30.000 rpm for 2.5 hours. Inactivated virus pellets from 28 mL of virus-containing supernatants were resuspended in 100 μl of 20 mM Hepes pH 7.4, 150 mM NaCl and the virus suspensions from five ultracentrifuge tubes were pooled. Inactivation of the virus was verified by the lack of replication in a Vero E6 infection experiment. Recombinant SARS-CoV-2 clone icSARS-CoV-2-mNG expressing mNeonGreen (49), derived from isolate SARS-CoV-2/human/USA/WA-CDC-WA1/2020, was obtained from the World Reference Center for Emerging Viruses and Arboviruses (WRCEVA) at the UTMB (University of Texas Medical Branch) and was used for microscopy-based replication assays. To generate icSARS-CoV-2-mNG stocks, 200,000 Caco-2 cells were infected with 50 μl of virus stock in a 6-well plate, the supernatant was harvested 48 hours p.i., centrifuged, and stored at −80°C. Viral titers were determined based on mNeonGreen expression after serial dilutions.

To generate replication-deficient pseudotyped VSV strains for single round infections, we first recovered VSV ΔG eGFP pseudotyped with VSV G, VSV ΔG eGFP (VSV G), from BSR-T7/5 cells using T7-expressing vaccinia virus (VACV) strain vTF7.3, pVSV eGFP dG (a kind gift from Connie Cepko, Harvard Medical School, Addgene plasmid # 31842), and T7-based expression vectors for VSV polymerase (pL), phosphoprotein (pP), nucleoprotein (pN), and glycoprotein (pG) (all kind gifts from Sean Whelan, Harvard Medical School) using published procedures (50). VSV ΔG eGFP (VSV G) was amplified in BSR-T7/5 cells transiently transfected with VSV G expression vector pMD2.G (a kind gift from Didier Trono, EPFL, Addgene plasmid # 12259) at 34°C. VSV ΔG eGFP (SARS-CoV-1 SΔ18) and VSV ΔG eGFP (SARS-CoV-2 SΔ18) were produced in BSR-T7/5 cells transiently transfected with pCAGGS SARS-CoV-1 SΔ18 or pCAGGS SARS-CoV-2 S Δ18, respectively, followed by infection with VSV ΔG eGFP (VSV G) and cultivation at 34°C. pCAGGS SARS-CoV-1 S Δ18 encodes aa 1-1237 of SARS-CoV-1 strain Frankfurt 1 (cloned from a template kindly provided by Stephan Poehlmann, German Primate Center), while pCAGGS SARS-CoV-2 SΔ18 encodes aa 1-1255 of SARS-CoV-2/human/China/Wuhan-Hu-1/2019 (cloned from a codon-optimized template kindly provided by Stephan Poehlmann). C-terminal truncations were introduced to avoid retention of spike proteins in the ER/Golgi and maximize exposure at the plasma membrane. Virus-containing supernatants were clarified by centrifugation and stored at −80°C. Viral titers were determined by infection of Vero E6 with dilution series of the virus for 8 hours, followed by quantification of green fluorescent cells by flow cytometry. Supernatants were shown to be free of VSV G pseudotyped virus, as no infection of BSR-T7/5 cells was observed.

To generate replication-competent chimeric VSV strains encoding eGFP and SARS-CoV-2 SΔ18 in place of the VSV glycoprotein, we inserted the coding sequence of SARS-CoV-2 SΔ18 (aa 1-1255 of SARS-CoV-2/human/China/Wuhan-Hu-1/2019) into pVSV eGFP dG. Replication-competent virus was recovered from BSR-T7/5 cells infected with VACV vTF7.3, transfected with pVSV eGFP SARS-CoV-2 SΔ18, pL, pP, pN, and pG, and cultivated at 34°C. Virus was amplified in Vero E6 cells at 34°C and virus-containing supernatants were clarified and stored at −80°C. Viral titers were determined by infection of Vero E6 with dilution series of the virus for 8 hours, followed by quantification of green fluorescent cells by flow cytometry. Chimeric virus strain VSV eGFP SARS-CoV-2 SΔ18 was confirmed to infect primate ACE2 expressing VeroE6 cells, but not BSR-T7/5 cells.


Expression and purification of SARS-CoV-2 S RBD

Cloning and expression of the receptor-binding domain (RBD) (residues 319-541) of spike protein from SARS-CoV-2/human/China/Wuhan-Hu-1/2019 (GenBank: QHD43416.1) was described earlier (17). In brief, the coding sequence was cloned into a customized pFastBac vector and fused with an N-terminal gp67 signal peptide and C-terminal His6 tag. A recombinant bacmid DNA was generated using the Bac-to-Bac system (Thermo Fisher Scientific). Baculovirus was generated by transfecting Sf9 cells with purified bacmid DNA using FuGENE HD (Promega), and subsequently used to infect suspension cultures of High Five cells (Thermo Fisher Scientific) at an MOI of 5 to 10. Infected High Five cells were cultivated at 28°C for 72 hours, shaking at 110 r.p.m. for protein expression. The supernatant was then concentrated using a 10 kDa MW cutoff Centramate cassette (Pall Corporation). The RBD protein was purified by Ni-NTA, followed by size exclusion chromatography, and buffer exchanged into 20 mM Tris-HCl pH 7.4 and 150 mM NaCl. Fluorescent RBD was produced by reaction with DyLight 488 NHS ester (Thermo Fisher Scientific) in 100 mM sodium phosphate pH 8.0, 150 mM NaCl, pH 8.0, followed by desalting with 7K MWCO Zeba spin desalting columns (Thermo Fisher Scientific).

Expression and purification of nanobodies

Nanobody coding sequences were cloned into pHEN6-based bacterial, periplasmic expression vectors with C-terminal HA-His6 or LPETG-His6 tags using Gibson cloning (New England Biolabs). Multivalent nanobodies were either directly cloned into pHEN6, or first assembled in pBluescript II (KS) + cloning vectors lacking promoters by Gibson cloning, followed by subcloning into pHEN6 using conventional ligation with T4 ligase. Nanobodies were produced in E. coli WK6 transformed with the respective expression vectors. Expression cultures were grown in Terrific Broth (TB), and expression induced with 1 mM IPTG at an OD600 of 0.6, followed by cultivation at 30°C for 16 hours. Bacterial pellets were resuspended in TES buffer (200 mM Tris-HCl pH 8.0, 0.65 mM EDTA, 0.5 M sucrose), and periplasmic extracts generated by osmotic shock in 0.25x TES, followed by Ni-NTA purification and either desalting by PD MiniTrap G-25 columns (GE Healthcare Life Sciences) (small scale purifications), or gel filtration with Superdex 75 Increase 10/300 GL or HiLoad 16/600 Superdex 75 pg columns (medium or large scale purifications) in 20 mM Hepes pH 7.4, 150 mM NaCl. Protein was concentrated using Amicon spin-concentrators with 3 or 10 kDa cutoff (Millipore). To produce fluorescently labeled VHHs by sortase A labeling (51), 45 μM VHH-LPETG-His6 was incubated with 475 μM GGGC-Alexa Fluor 488 and 20 μM His6-tagged sortase A 7m for 2 hours. Sortase A 7m and unreacted VHHs were removed by depletion with Ni-NTA, followed by gel filtration on a Superdex 75 Increase 10/300 GL column.

Expression and purification of CC12.3 Fab

CC12.3 Fab was produced as described previously (17). In brief, the coding sequences of heavy and light chain of CC12.3 Fab were cloned into phCMV3. ExpiCHO cells were transiently co-transfected at a ratio of 2:1 (HC:LC) using ExpiFectamine CHO Reagent (Thermo Fisher Scientific) according to the manufacturer’s instructions. The supernatant was collected at 10 days post-transfection. The Fabs were purified with a CaptureSelect CH1-XL Affinity Matrix (Thermo Fisher Scientific) followed by size exclusion chromatography.

Expression and purification of SARS-CoV-2 spike

Soluble, trimeric SARS-CoV-2 spike was expressed as a fusion of aa 1-1208 of SARS-CoV-2/human/China/Wuhan-Hu-1/2019 containing mutations R682G, R683S, R685S, K986P, V987P (S2-P), a C-terminal T4 fibritin trimerization motif, an HRV3C protease cleavage site, a TwinStrepTag and a His8 tag from a mammalian expression vector based on pαH, as previously described (6). For some cryo-EM experiments, the SARS-CoV-2 spike HexaPro mutant with additional proline mutations was used (52). In brief, protein was produced in FreeStyle 293F cells transfected with FreeStyle MAX reagent (Thermo Fisher Scientific) or Expi293F cells transfected with ExpiFectamine 293 (Thermo Fisher Scientific). The ectodomain was purified from filtered supernatant on Streptactin XT resin (IBA Lifesciences), followed by gel filtration on a HiLoad® 16/600 Superdex 200 column in 50 mM Tris pH 8, 200 mM NaCl. Soluble spike protein was biotinylated using UV-traceable ChromaLink Biotin (SoluLink).


The following commercially available antibodies were used: mouse anti-HA antibody HA.11 (clone 16B12, Biolegend, Cat# 901503, RRID:AB_2565005), rabbit anti-DYKDDDDK (FLAG) tag antibody (clone D6W5B, Cell Signaling Technology Cat# 14793, RRID:AB_2572291), HRP-coupled rabbit anti-E tag antibody (Bethyl Laboratories Cat# A190-133P, RRID:AB_345222), HRP-coupled MonoRab rabbit anti-camelid VHH antibody (clone 96A3F5, GenScript Cat# A01860-200, RRID:AB_2734123), HRP-coupled mouse anti-HA-Tag (clone 6E2, Cell Signaling Technology Cat# 2999, RRID:AB_1264166), goat anti-mouse IgG Alexa Fluor Plus 647 (Thermo Fisher Scientific Cat# A32728, RRID:AB_2633277), goat anti-rabbit IgG Alexa Fluor Plus 647 (Thermo Fisher Scientific Cat# A32733, RRID:AB_2633282).

Nanobody library generation

To elicit heavy chain-only antibodies against SARS-CoV-2 spike, one seven-year-old male llama (Lama glama), and one six-year-old male alpaca (Vicugna pacos) were immunized. All immunizations were authorized by the Landesuntersuchungsamt Rheinland-Pfalz (23 177-07/A 17-20-005 HP). The llama was immunized six times every week with 200 μg SARS-CoV-2 S RBD, complemented with 300 μL formaldehyde-inactivated virus (corresponding to ~109 pfu) in the last two injections. The alpaca was immunized four times every two weeks with 200 μg SARS-CoV-2 S RBD. GERBU Adjuvant Fama (GERBU Biotechnik GmbH) was used as an adjuvant in all immunizations. In two (llama) or one (alpaca) injection, respectively, antigen and adjuvant were injected separately. VHH plasmid libraries in the M13 phagemid vector pD (pJSC) were generated as described before (53). In brief, RNA from peripheral blood lymphocytes was extracted and used as a template to generate cDNA using three sets of primers (random hexamers, oligo(dT), and primers specific for the constant region of the alpaca heavy chain gene). VHH coding sequences were amplified by PCR using VHH-specific primers, cut with AscI and NotI, and ligated into pJSC linearized with the same restriction enzymes. E. coli TG1 cells (Agilent) were electroporated with the ligation reactions and the obtained ampicillin-resistant colonies were harvested, pooled, and stored as glycerol stocks.

Nanobody identification

SARS-CoV-2 spike RBD-specific VHHs were obtained by phage display and panning with a protocol modified from Schmidt et al. (53). E. coli TG1 cells containing the VHH library were infected with helper phage VCSM13 to produce phages displaying the encoded VHHs as pIII fusion proteins. Phages in the supernatant were purified and concentrated by precipitation. Phages presenting RBD-specific VHHs were enriched using enzymatically or chemically biotinylated RBDs immobilized to MyOne Streptavidin T1 Dynabeads (Thermo Fisher Scientific). The retained phages were used to infect E. coli ER2738 and subjected to a second round of panning. 95 E. coli ER2837 colonies yielded in the second panning were grown in 96-well plates and VHH expression induced with IPTG. VHHs leaked into the supernatant were tested for specificity using ELISA plates coated with control protein maltose binding protein (MBP) or SARS-CoV-2 RBD. Bound VHHs were detected with HRP-coupled rabbit anti-E-Tag antibodies (Bethyl), HRP-coupled MonoRabᵀᴹ Rabbit Anti-Camelid VHH Antibody (GenScript), and the chromogenic substrate TMB. Reactions were stopped with 1 M HCl and absorption at 450 nm was recorded. Positive candidates were sequenced, and representative nanobodies cloned into bacterial expression vectors for further analysis.


To test nanobody candidates, SARS-CoV-2 spike RBD or the control protein MBP in PBS were immobilized on ELISA plates at a concentration of 1 μg/mL overnight. Serial 10-fold dilutions of HA-tagged nanobodies in 10% FBS/PBS were incubated with the immobilized antigen, followed by incubation with HRP-coupled anti-HA (clone 6E2, 1:5000, Cell Signaling), and the chromogenic substrate TMB. Reactions were stopped with 1 M HCl and absorption measured at 450 nm.

Surface plasmon resonance

Surface plasmon resonance experiments were performed using a Biacore 8K instrument (GE Healthcare). The flow system was cleaned using the maintenance “Desorb” function (Desorb Kit, GE Healthcare). The system was flushed with running buffer (20 mM HEPES pH 7.4, 150 mM NaCl, 0.05% Tween 20) and all steps were performed at 25°C chip temperature. Before immobilization, a streptavidin-functionalized sensor chip (Series S Sensor Chip SA, GE Healthcare) was conditioned with three consecutive 1-min injections of 1 M NaCl in 50 mM NaOH (10 μL/min). After immobilization of biotinylated SARS-CoV2-RBD (50 nM, 5 μL/min, 300 s) on the sensor chip flow cell 2, the flow system was washed using 50% isopropanol in 1 M NaCl and 50 mM NaOH. For kinetic binding measurements, various VHHs were injected (30 μL/min, association: 90 s, dissociation: 180 s) over both flows. For epitope binning, the VHHs were pairwise tested for competitive binding using the ABA-injection feature. After each cycle, the surfaces were regenerated with a 120 s injection step of 10 mM glycine pH 2.1. Data were collected at a rate of 10 Hz. The binding data were double referenced by blank cycle and reference flow cell subtraction. Processed data were fitted by the 1:1 interaction model using Biacore Insight Evaluation Software (version 2.0. 15.12933).

Crystallization and structural determination

VHH E/VHH U/RBD, VHH V/CC12.3/RBD, and VHH W/CC12.3/RBD complexes were formed by mixing each of the protein components at an equimolar ratio and incubating overnight at 4°C. The final concentration for the complexes for crystallization screening ranged from 13.5 to 17.8 mg/ml. Crystallization screening was performed using the vapor-diffusion method in sitting drops containing 0.1 μl of protein and 0.1 μl of reservoir solution with the 384 conditions of the JCSG Core Suite (Qiagen) using the robotic CrystalMation system (Rigaku) at The Scripps Research Institute. Diffraction-quality crystals were obtained in the following conditions:

VHH E/VHH U/RBD complex (13.5 mg/mL): 20% PEG-3000, 0.1 M citrate pH 5.5 at 20°C,

VHH V/CC12.3/RBD complex (17.8 mg/mL): 20% PEG 3350, 0.2 M Na2HPO4, pH 9.1 at 20°C,

VHH W/CC12.3/RBD complex (17.6 mg/mL): 1.0 M Li-chloride, 10% PEG-6000, 0.1 M Bicine pH 9.0 at 20°C.

All crystals appeared within 7 days after tray set-up. Before flash cooling in liquid nitrogen for X-ray diffraction studies, crystals were equilibrated in reservoir solution supplemented with 10% ethylene glycol at day 7. Diffraction data were collected at cryogenic temperature (100 K) at either Stanford Synchrotron Radiation Lightsource (SSRL) on beamline 12-1 with a beam wavelength of 0.97946 Å, or at the Advanced Photon Source (APS) at Argonne National Labs on beamline 23ID-B at a wavelength of 1.03317 Å, and processed with HKL2000 (54). Structures were solved by molecular replacement (MR) using PHASER (55) with MR templates derived from PDB: 6XC7 (17), 7JMW (56) and 6WAQ (16). Iterative model building and refinement were carried out in COOT (57) and PHENIX (58) respectively. Epitope and paratope residues, as well as their interactions, were identified by accessing PISA at the European Bioinformatics Institute ( (59).

Cryo-EM sample preparation and imaging

Spike trimer (2.4 mg/ml S2-P (6) for VHH E and VHH V; HexaPro (52) for VHH VE) and nanobody were mixed in a 1:6 molar ratio for VHH E and VHH V, and 1:4 for VHH VE, followed by incubation on ice for 10 min. Prior to cryo-EM grid preparation, grids were glow-discharged with 25 mA for 2 min using an EMS 100X (Electron Microscopy Sciences) glow-discharge unit. Grids used were UltrAuFoil Gold 200 mesh (R 2/2 geometry; Quantifoil Micro Tools GmbH; VHH VE) or CryoMatrix® holey grids with amorphous alloy film (R 2/1 geometry; Zhenjiang Lehua Technology Co., Ltd; VHH E, VHH V). 3-μl aliquots of sample solutions were applied to the grids and the grids with sample were then vitrified in a Vitrobot Mk IV (Thermo Fisher Scientific) at 4°C and 100% humidity (blot 10 s, blot force 3, 595 filter paper (Ted Pella Inc.). Cryo-EM data collection was performed with EPU Thermo Fisher Scientific) using a Krios G3i transmission-electron microscope (Thermo Fisher Scientific) operated at 300 kV in the Karolinska Institutet’s 3D-EM facility. Images were acquired in nanoprobe EFTEM SA mode with a slit width of 10 eV using a K3 Bioquantum during 1.5 s during which 60 movie frames were collected with a flux of 0.81 e2 per frame (see table S3). Motion correction, CTF-estimation, Fourier binning (to 1.02 Å/px), picking and extraction in 600 pixel boxes (size threshold 200 Å, distance threshold 100 Å, using the pretrained BoxNet2Mask_20180918 model) were performed on the fly using Warp (60).

A total of 6,468 (VHH E), 9,861 (VHH V), and 12,606 (VHH VE) micrographs were selected based on an estimated resolution cutoff of 4 Å and defocus below 2 microns. and 245,000 (VHH E), 509,302 (VHH V), and 982,221 (VHH VE), particles were picked by Warp (60). Extracted particles were imported into cryoSPARC v2.15.0 (61) for 2D classification, 3D classification and non-uniform 3D refinement. The particles were processed with C1 symmetry. After 2D classification, clean classes with high-resolution features (and with characteristic trimeric spike views) were retained and used to build ab-initio 3D reconstructions. These were further processed for heterogeneous refinement (4.78 Å/pixel) that resulted in reconstructions showing high-resolution structural features in the core of the spike. One round of homogeneous refinement was followed by non-uniform refinement. For the VHH VE dataset, the particles from refinement job containing angular information was migrated from cryoSPARC to RELION 3.1 (62) for 3D classification without alignment (1.02 Å/pixel, 35 iterations, T = 8) and classified into four classes using reconstruction in cryoSPARC as reference map (low-pass filtered to 25Å). One class containing 92,938 particles, where densities for all six nanobodies were visible, was transferred to cryoSPARC for final refinement in C1. (1.02 Å/pixel). All final reconstructions were analyzed using 3D-FSC (63) (figs. S4, S8, and S17) and there was no significant anisotropy in the full map reconstructions (sphericity 0.91 – 0.96). All CTF refinements were local CTF refinements interspersed with global aberration correction (beamtilt, trefoil, tetrafoil and spherical aberration). Please see table S3 for data collection and processing statistics and the respective cryo-EM data processing schemes in figs. S3, S7, and S16. VHH VE and VHH E were pseudo-C3 symmetric especially in the RBD-VHH parts. For VHH E, we symmetry-expanded a particle set with partial-signal subtraction of all parts except for one VHH E-RBD. From this symmetry expanded particle set, we performed local reconstruction of the single VHH E-RBD component. This process significantly enhanced the resolvability of the map and thereby enabled molecular fitting of the density. The locally reconstructed density for RBD-VHH E was then combined with the main map using the combined focused map procedure for refinement as implemented in PHENIX (60). A similar procedure was used for local reconstruction of the RBD + VHH VE part from the Spike VHH VE particles and ensuing development of a combined focused map for refinement.

Cryo-EM model building and structure refinement

The structure of the spike protein trimer PDB: 6ZXN (15) was used as a starting model for model building. The structure of the VHHs bound to the RBDs were modeled from the basis of their respective crystallographic models. Structure refinement and manual model building were performed using COOT (57) and PHENIX (58) in interspersed cycles with secondary structure, Ramachandran, rotamers and bond geometry restrains. Structure figures and EM density-map figures were generated with UCSF ChimeraX (64) and COOT (57), respectively. Please see table S4 for refinement and validation.

ACE2-RBD binding assay

HEK 293T cells stably expressing ACE2-tagRFP-t were detached with 1 mM EDTA in PBS. 0.8 μM DyLight 488-labeled SARS-CoV-2 RBD was incubated with different concentrations of VHHs at room temperature (RT) for 60 min. ACE2-expressing cells were subsequently incubated with RBD-VHH mixtures on ice for 30 min. The DyLight 488 signal was measured in all ACE2-tagRFP-t positive cells using a MACS Quant VYB flow cytometer.

VHH-mediated SARS-CoV-2 spike fusion assay (live cell imaging)

HEK 293 SARS-CoV-2 spike Δ18 eGFP and HEK 293 SARS-CoV-2 spike Δ18 tag-RFP cells were seeded in tissue culture-treated CellCarrier-96 Ultra Microplates (Perkin Elmer) at a density of 100,000 cells of each cell line per well in phenol red-free full medium containing 1 μg/mL doxycycline. 24 hours post seeding, cells were treated with the indicated concentrations of nanobodies and cultivated at 37°C, 5% CO2. Every 20 min, images were recorded in four fields of view per well for 14 hours using a Zeiss Observer.Z1 wide-field microscope with 20X PlanApochromat objective (NA = 0.8). eGFP and tagRFP-t colocalization was quantified using ImageJ plugin EzColocalization (65). Pearson correlation coefficients (PCC) between both channels were determined for each time point, including all pixels (no thresholding).

SARS-CoV-2 spike-ACE2 fusion assay (live cell imaging)

HEK 293 SARS-CoV-2 spike Δ18 eGFP and HEK 293T ACE2-tagRFP-t labeled with CellTracker Orange CMRA (1:5000) were seeded in tissue culture-treated CellCarrier-96 Ultra Microplates (Perkin Elmer) at a density of 100,000 cells of each cell line per well in phenol red-free full medium. 24 hours post seeding, cells were treated with 1 μg/mL doxycycline and 1 μM of the indicated nanobodies, and cultivated at 37°C, 5% CO2. Every 20 min, images were recorded in four fields of view per well for 14 hours using a Zeiss Observer.Z1 wide-field microscope with 20X PlanApochromat objective (NA = 0.8). eGFP and tagRFP-t colocalization was quantified using the ImageJ plugin EzColocalization (65). Pearson correlation coefficients (PCC) between both channels were determined for each time point, including all pixels (no thresholding). To normalize fusion, PCC values at 1 hour were subtracted from PCC values of each time point. Average values of four fields of view were corrected by average values of uninduced cells from the same time point. Fusion at t = 12 hours was defined as 100% fusion.

Neutralization assay with VSV ΔG eGFP (SARS-CoV-1/2) (infection assay)

Single round infection experiments with replication-deficient VSV ΔG eGFP (SARS-CoV-1) and VSV ΔG eGFP (SARS-CoV-2) were performed in Vero E6 cells. 48-well plates were seeded with 3.5∙104 Vero E6 cells per well. On the next day, 104 infectious units (IU) of VSV ΔG eGFP (SARS-CoV-1/2) in 50 uL DMEM (without FBS) (titered to achieve ~30% infection) were mixed with 50 uL VHH dilution in DMEM (without FBS), yielding the indicated final VHH concentrations. Virus mixtures were incubated at 37°C for 1 hour, and subsequently used to infect Vero E6 cells. The inoculum was removed after 1 hour and cells were covered with 0.5 mL full DMEM (FBS). After 7 hours at 37°C (8 hours p.i.), cells were trypsinized, fixed, and eGFP-positive cells quantified using a MACS Quant VYB flow cytometer. Inhibitory concentration 50 (IC50) values were calculated using the “log(inhibitor) vs. normalized response” equation in GraphPad Prism.

Neutralization assays with SARS-CoV-2 wt (Plaque reduction neutralization test - PRNT)

Plaque reduction neutralization tests (PRNTs) with SARS-CoV-2/human/Germany/Heinsberg-01/2020 were performed in Vero E6 cells. 24-well plates were seeded with 1.5∙105 Vero E6 cells per well. The following day, nanobodies were subjected to a two-fold dilution series. 120 μl of each nanobody dilution was mixed with 120 μl of OptiPROTM SFM cell culture media (Thermo Fisher Scientific) containing 80 pfu of SARS-CoV-2. After 1 hour at 37°C, 200 μl of each mixture was added to 24-well plates. After 1 hour at 37°C, the inoculum was removed, and cells were overlaid with a 1:1 mixture of 1.5% carboxymethylcellulose (Sigma Aldrich) in 2x MEM (Biochrom) with 4% FBS (Thermo Fisher Scientific). After a 3-day incubation at 37°C, cells were fixed with 6% formaldehyde and stained with 1% crystal violet in 20% ethanol. Plaques were counted manually. Inhibitory concentration 50 (IC50) values were calculated using the “log(inhibitor) vs. normalized response” equation in GraphPad Prism.

Neutralization assays with SARS-CoV-2 mNeonGreen (replication assay)

Microscopy-based neutralization experiments with SARS-CoV-2 clone icSARS-CoV-2-mNG were performed with Caco-2 cells. 104 cells/well were seeded in 96-well plates. The next day, cells were infected with icSARS-CoV-2-mNG at an MOI of 1.1 in media containing 5% FBS and serial dilutions of the indicated nanobodies. Cells were subsequently cultivated for 48 hours in the presence of the nanobodies, fixed with 2% PFA, and stained with 1 μg/mL Hoechst 33342 at 37°C for 10 min. The staining solution was removed and exchanged to PBS. To quantify infection rates, images were recorded with a Cytation3 instrument (Biotek). Total (Hoechst positive) and infected (mNeonGreen positive) cells were quantified using the Gen5 Software (Biotek). Inhibitory concentration 50 (IC50) values were calculated as the half-maximal inhibitory dose using 4-parameter nonlinear regression (GraphPad Prism).

Identification and isolation of escape mutants

To test the emergence or presence of escape mutants of replication-competent VSV SARS-CoV-2 SΔ18 eGFP in the presence of nanobodies, virus was replicated in the presence of serial dilutions of nanobodies on Vero E6 cells (31). 1.4∙105 cells/well were seeded into 12-well plates. On the next day, 0.5 mL virus dilution (equivalent to an MOI of 0.5) in DMEM (3% FBS, PS) was incubated with 0.5 mL VHH dilution in DMEM (3% FBS, PS) at room temperature for 30 min. The mixture was subsequently transferred to 12-wells with Vero E6 cells and cultivated at 37°C for four days. The fraction of eGFP-positive cells as well as cytopathic effect (CPE) were evaluated and selected wells harvested for further cultivation: Cells were lysed in RLT PLUS buffer containing 1% β-mercaptoethanol, followed by purification of RNA with the RNeasy Mini Kit (Qiagen). Supernatants were cleared and stored at 4°C. 1:5 dilutions in DMEM (3% FBS, PS) were used to infect cells for a second round of selection under otherwise identical conditions. eGFP-positive cells and CPE were evaluated 5 days post infection and selected supernatants and cell lysates harvested.

To quantify escape variants of virus replicated in the presence of neutralizing nanobodies, viral RNA was reversely transcribed to cDNA using a SARS-CoV-2 spike specific primer (FS1957 – 5′-ACTGCTGGAATGGCAGGAAC-3′). The RBD coding sequence flanked by additional 70 bp was amplified by PCR using Phusion DNA polymerase (New England Biolabs) and primer FS1956 (5′-TCTGAGCGAGACAAAGTGCACC-3′) and FS1957, and subjected to Tn5-mediated tagmentation and incorporation of barcoded adapters. Amplicons were sequenced on an Illumina MiSeq machine (v2 nano, 2x150 bp paired-end). After sequencing, FASTQ files were examined using FastQC (Version 0.11.9) and multiqc (Version 1.9). For the alignment, the SARS-CoV-2 RBD reference was indexed using bowtie2-build (Version 2.4.1) and samtools (Version 1.10). The reads where aligned using bowtie2 (Version 2.4.1). Conversion into BAM file, sorting and indexing was performed using samtools. BAM files were examined with QualiMap (Version 2.2.2-dev) and multiqc. Variant calling was performed using default GATK HaplotypeCaller (Version, and variants were inspected in bam.files using IGV. To quantify the frequencies of mutated interfaces, we determined which mutations within one sample represented individual haplotypes, i.e., in which cases none of the individual reads contained multiple of the mutations (marked with asterisks in tables S5 and S6). Where a global statement was not possible due to the distance of the mutations (marked with hash symbols in tables S5 and S6), the fraction of sequences with at least one mutation was estimated based on visual inspection of individual reads.

To isolate defined escape mutants, resistant virus was amplified from individual virus plaques grown on Vero E6 cells. 1.4∙105 Vero E6 cells per well were seeded into 12-wells. The next day, 10-fold serial dilutions of supernatants from virus replicated in the presence of VHH E, U, V, W, E and U, E and V, E and W, or LaM-4 (round 1) were prepared and incubated in the presence or absence of 1 μM of VHHs at RT for 30 min. Vero E6 cells were infected for 30 min at 37°C, followed by overlay of cells with 0.75% agarose, MEM, 2% FBS, PS, 25 mM HEPES with or without the respective VHHs. Two days post infection, fluorescent plaques grown in the presence of individual nanobodies were identified and marked. No VHH-resistant fluorescent plaques emerged from supernatants of the combinations VHH E and U, E and V, or E and W. A plug of the agarose on top of marked plaques was removed with a Pasteur pipette and incubated in 500 uL DMEM for 4 hours at 4°C. 48-wells were infected with 250 μL of this virus dilution and cultivated in DMEM (2% FBS, PS, 25 mM Hepes) at 37°C until all cells were eGFP-positive. Supernatants were stored at 4°C and cells lysed in RLT PLUS buffer containing 1% β-mercaptoethanol, followed by purification of RNA with the RNeasy Mini Kit (Qiagen). Viral RNA was reversely transcribed to cDNA using a SARS-CoV-2 spike specific primer. The RBD coding sequence flanked by additional 70 bp was amplified by PCR and sequenced by Sanger sequencing. 6/6 plaques resistant to VHH E exhibited the point mutation S494P, 5/5 plaques resistant to VHH U and 5/5 plaques resistant to VHH W encoded the point mutant S371P, and 8/8 plaques resistant to VHH V contained the point mutation K378Q. 4/4 plaques from virus cultivated in the presence of control VHH LaM-4 did not contain any mutations. Selected clones were amplified in 15 cm dishes of Vero E6 cells and cleared supernatants stored at −80°C.

Growth curves of VSV eGFP SARS-CoV-2 SΔ18 (replication assay)

Vero E6 cells were seeded in 24-well plates (7∙104 cells per well). The next day, cells were infected with plaque-purified VSV eGFP SARS-CoV-2 Δ18 isolates at an MOI of 0.02 for 1 hour. The inoculum was removed, cells were washed with PBS twice, and subsequently cultivated in DMEM (2% FBS, 30 mM HEPES, PS). At the indicated time points, supernatants were cleared by centrifugation at 1000 g, 4°C, for 10 min and frozen at −80°C until titration. For titration, Vero E6 cells were seeded into 96-well plates at a density of 104 cells per well. Cells were infected with two-fold serial dilutions of virus-containing supernatants for 1 hour, followed by cultivation in full medium for 7 hours. Cells were trypsinized, fixed in formaldehyde, and green fluorescence was quantified using a MACS Quant VYB flow cytometer.

Supplementary Materials

Supplementary Text

Figs. S1 to S23

Tables S1 to S8

References (6874)

MDAR Reproducibility Checklist

Movies S1 to S22

View/request a protocol for this paper from Bio-protocol.

This is an open-access article distributed under the terms of the Creative Commons Attribution license, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

References and Notes

Acknowledgments: We thank Janine Ciftcioglu, Gonzalo Saavedra Perez Salas, Janett Wieseler, and Genis Valentin Gese for technical support, and Ramona Businger for help with data analysis. We are grateful to Gabor Horvath and the Microscopy Core Facility of the Medical Faculty at the University of Bonn for providing help and services, and the Karolinska Institutet’s 3D-EM facility, which was used for collection of all cryo-EM data. We thank Henry Tien for technical support with the crystallization robot, and Robyn Stanfield for assistance in X-ray data collection. We are grateful to the staff of Stanford Synchrotron Radiation Lightsource (SSRL) beamline 12-1 and Advanced Photon Source (APS) beamline 23ID-B for assistance. Funding: This study was partly supported by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation): GRK2168-272482170 (F.I.S.), SFB1403-414786233 (F.I.S.), TRR237-369799452 (F.I.S. and B.M.K.), SPP1923-429513120 (F.I.S. and M.S.), the Emmy Noether Programme 322568668 (F.I.S.) and LU 1933-3/1 (K.U.L.), GE 976/9-2 (M.G.), SCHI1073 (M.S.), and Germany’s Excellence Strategy – EXC2151–390873048 (F.I.S., J.S.B., H.K., and M.G.); by the Klaus Tschira Boost Fund (KT07) (F.I.S.), the Bundesministerium für Bildung und Forschung (BMBF), project TTU 01.806 (B.M.K.); by the Baden-Württemberg foundation (BW-Stiftung, BWST_WSF-022) (M.S.), the MWK Baden-Württemberg (33-7533-6-21/9/1) (M.S.), the University Hospital Tübingen (M.S.); the European Union's Horizon 2020 research and innovation program (CoroNAb consortium, L.H.); the Swedish Research Council (2017-6702 and 2018-3808) (B.M.H.); the Knut and Alice Wallenberg Foundation (B.M.H.); startup funds from the University of Illinois at Urbana-Champaign (N.C.W.); and the Bill and Melinda Gates Foundation OPP1170236 (I.A.W.). Use of the SSRL, SLAC National Accelerator Laboratory, is supported by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, under contract no. DE-AC02–76SF00515. The SSRL Structural Molecular Biology Program is supported by the DOE Office of Biological and Environmental Research and by the National Institutes of Health, National Institute of General Medical Sciences (including P41GM103393). General Medical Sciences and Cancer Institutes Structural Biology Facility at the Advanced Photon Source (APS) has been funded by federal funds from the National Cancer Institute (ACB-12002) and the National Institute of General Medical Sciences (AGM-12006). This research used resources of the APS, a U.S. Department of Energy (DOE) Office of Science User Facility operated for the DOE Office of Science by Argonne National Laboratory under contract DE-AC02-06CH11357. Extraordinary facility operations were supported in part by the DOE Office of Science through the National Virtual Biotechnology Laboratory, a consortium of DOE national laboratories focused on the response to COVID-19, with funding provided by the Coronavirus CARES Act. Author contributions: Paul-Albert Koenig: Conceptualization, Methodology, Formal analysis, Investigation, Data curation, Writing – original draft / review and editing, Visualization, Supervision. Hrishikesh Das: Formal analysis, Investigation, Writing – review and editing, Visualization. Hejun Liu: Formal analysis, Investigation, Writing – review and editing, Visualization. Beate M. Kümmerer: Methodology, Formal analysis, Investigation, Writing – review and editing, Funding acquisition. Florian N. Gohr: Investigation, Data curation, Writing – review and editing. Lea-Marie Jenster: Investigation, Data curation, Writing – review and editing. Lisa D. J. Schiffelers: Investigation, Data curation, Writing – review and editing. Yonas M. Tesfamariam: Investigation, Data curation. Miki Uchima: Investigation, Data curation. Jennifer D. Wuerth: Investigation, Data curation, Writing – review and editing. Karl Gatterdam: Methodology, Investigation, Data curation. Natalia Ruetalo: Investigation, Data curation. Maria H. Christensen: Resources, Investigation. Caroline I. Fandrey: Resources, Investigation. Sabine Normann: Methodology, Investigation. Steffen Pritzl: Investigation. Jan M. P. Tödtmann: Methodology, Investigation. Leo Hanke: Resources. Jannik Boos: Formal Analysis, Data curation. Meng Yuan: Investigation. Xueyong Zhu: Investigation. Jonathan Leo Schmid-Burgk: Methodology, Resources. Hiroki Kato: Methodology, Validation. Michael Schindler: Methodology, Writing – review and editing, Supervision, Funding acquisition. Ian A. Wilson: Methodology, Writing – original draft / review and editing, Supervision, Funding acquisition. Matthias Geyer: Methodology, Writing – review and editing, Supervision, Funding acquisition. Kerstin U. Ludwig: Methodology, Data curation, Writing – review and editing, Supervision, Funding acquisition. B. Martin Hällberg: Conceptualization, Methodology, Formal analysis, Investigation, Data curation, Writing – original draft / review and editing, Supervision, Funding acquisition. Nicholas C. Wu: Conceptualization, Methodology, Formal analysis, Investigation, Data curation, Writing – original draft / review and editing, Supervision, Funding acquisition. Florian I. Schmidt: Conceptualization, Methodology, Formal analysis, Investigation, Data curation, Writing – original draft / review and editing, Supervision, Funding acquisition. Competing interests: B.M.H., P.A.K., H.L., S.N., F.I.S., J.T., I.A.W., N.C.W., and M.Y., are listed as inventors of a pending patent application. P.A.K. and F.I.S. are cofounders and shareholders of Dioscure Therapeutics SE; B.M.H. is co-founder and shareholder of Macrostruct Holding and Consulting AB.; M.G. is a cofounder and shareholder of IFM Therapeutics; F.I.S. is a consultant and shareholder to IFM Therapeutics. The other authors declare no competing interest. Data and materials availability: All data generated or analyzed during this study are included in this published article and its supplementary materials. Materials generated in this study will be made available for academic research on the basis of a materials transfer agreement. Crystallographic coordinates and data have been deposited in Protein Data Bank under accession codes 7KN5 (RBD + VHH E + VHH U), 7KN6 (RBD + VHH V + CC12.3), and 7KN7 (RBD + VHH W + CC12.3). The cryo-EM density maps have been deposited in the Electron Microscopy Data Bank, under accession codes EMD-23018 (Spike + VHH E), EMD-11978 (RBD + VHH E), EMD-11977 (Spike + VHH V), EMD-11981 (Spike + VHH VE), and EMD-11980 (RBD + VHH VE). The atomic coordinates have been deposited in the Protein Data Bank, under IDs 7KSG (Spike + VHH E), 7B14 (RBD + VHH E), 7B11 (Spike + VHH V), 7B18 (Spike + VHH VE), and 7B17 (RBD + VHH VE). NGS data of the RBD sequences of VSV eGFP SARS-CoV-2 S Δ18 derivatives described in Fig. 5 and tables S5 and S6 are deposited in the Sequence Read Archive (SRA) under the BioProject ID PRJNA679438. This work is licensed under a Creative Commons Attribution 4.0 International (CC BY 4.0) license, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. To view a copy of this license, visit This license does not apply to figures/photos/artwork or other content included in the article that is credited to a third party; obtain authorization from the rights holder before using such material.
View Abstract

Stay Connected to Science


Navigate This Article